SOLD - Pittsburgh Modular Patch Box Enclosure £250

[pilotbicycles]

Here is the now discontinued Patch Box from Pittsburgh Modular - £SOLD

This was my gatekeeper to the magical and wonderful world of modular synths. 
This box is essentially the bridge between modular synthesis, and effects pedals - acting as the case and the interface with which you can take almost any input source and patch through any modules your heart desires. 

 

There are some great demos out there, and this pedal can pretty much be anything you can imagine - there are SO many eurorack modules out there.

The pedal has the following features:
- an input DRIVE control that helps boost your input up the level required for modular synthesis and can also add some grit and overdrive to your input (nice smooth overdrive for guitar/bass right there).

- the OUTPUT control sets the volume coming out of the pedal so you can either match this to unity or any boost or cut you desire.

- two EXPRESSION pedal inputs on the back, with corresponding patch points on the top. Allowing you expression pedal control of pretty much any parameter of the installed modules of your choice.

- three (3) FOOTSWITCHES - two of these are assignable allowing you to switch all manner of routings, whether they be modulation sources (e.g. switch between LFO or Expression Pedal sources), or whole modules/signal chains. Very flexible. The third and right-most FOOTSWITCH engages and disengages the patch box.

- additionally there is x2 MULTIPLE allowing you to patch audio or modulation sources to up to two (2) destinations.



Important stats:

100% Eurorack Modular Format Compatible
Available Width for Modules: 213mm (42hp)
Heavy Duty Steel Case Construction
Available Depth for Modules: 42mm
9 Sliding Square Nuts Per Rail Supports Up To 9 Modules
20 (4-40 Size) Black Panel Screws Included
True Bypass Foot Switch
Dual, Assignable A/B Foot Switches
Patchable High Quality Pre-Amp with Overdrive
Patchable Output Level Attenuator
Dual, Assignable Expression Pedal Inputs
Patchable Passive Multiple Signal Splitter
Output Jack Controlled On/Off Switch
Powered Bus Board supplies +12v / -12v / +5v
Custom Powered Bus Board with 6 Keyed Power Headers
Eurorack Bus Compatible Bus Board
Rear Mounted 2.1mm DC Power Jack
15VAC 2.6A DC Universal Power Adapter

Patch Box Power Supply:
Total Power Output: +12v @ 900mA, -12v @ 700mA, and +5v @500mA
Integrated bus board delivers power for up to 6 modules using standard 16 pin, keyed eurorack power headers.
The power supply uses an external 15V DC 2.6A 2.1mm barrel jack universal power adapter.

Patch Box Dimensions:
External Width: 244mm
External Length: 229mm
External Depth (including feet): 51mm
Minimum Depth Available for Modules: 42mm
Maximum Depth Available for Modules: 42mm

 

UK Power Supply Included

Comes with original box and documentation.

Edited January 29, 2018 by pilotbicycles
Item Sold

[andybassdoyle]

Nice. I would love to harness this much science 

[pilotbicycles]

SOLD