denosaur1954 Posted April 1, 2015 Share Posted April 1, 2015 Hi ,I don't know if anyone can help me,my Ashdown EB 180 combo keeps blowing fuses on the IEC input,the fuse I took out was a 2 amp slow blow,and I replaced it like for like,Put the fuse in turn on the power and ! Poof ,blown fuse.I did not have the cab connected at the time and wondered if that was the cause.The initial blown fuse occurred during a practice session and everything was connected up.Any heads up ,is the fuse too small power wise etc.My first thought was to buy a cheap replacement amp and keep the cab as,well, a cab.Cheers in anticipation. Quote Link to comment Share on other sites More sharing options...
icastle Posted April 1, 2015 Share Posted April 1, 2015 If the fuse you took out was a T2A then replacing it with the same type is the correct first move. If that fuse blows then don't be tempted to replace it with a bigger one - all you'll achieve is a bigger repair bill. From your description, my first suspicion would be a faulty mains transformer. Quote Link to comment Share on other sites More sharing options...
denosaur1954 Posted April 1, 2015 Author Share Posted April 1, 2015 Thanks, that was my first thought,it could be an expensive repair bill,might be worthwhile scrapping the amp part and keeping the cab.I have a Laney rb4 as a spare which I can use for the odd gig. Quote Link to comment Share on other sites More sharing options...
icastle Posted April 1, 2015 Share Posted April 1, 2015 It might be an expensive repair but it might not be - diagnosing something you can't see is never very accurate. It'd be best to get someone to look at it before writing it off. Quote Link to comment Share on other sites More sharing options...
Subthumper Posted April 1, 2015 Share Posted April 1, 2015 These did suffer from a weak transformer, I've replaced a few of these. The replacement that Ashdown supplied was a big bigger. It's not a big job for a tech to diagnose the where the fault lies, transformer, power supply or power amp. Get a tech to look it over and work from there. Ashdown are pretty good on the service front, worth telling them the serial number to gain some sympathy if it's the transformer. Quote Link to comment Share on other sites More sharing options...
denosaur1954 Posted April 2, 2015 Author Share Posted April 2, 2015 Thanks for your replies, I'll be taking the amp to our local technician to let him have a look.I like the sound enough to put my hand in my pocket. Quote Link to comment Share on other sites More sharing options...
40hz Posted April 2, 2015 Share Posted April 2, 2015 I had the exact same problem with my 15-180. It's very common and is almost always a knackered transformer. Not an expensive fix and Ashdown are superb to deal with. Quote Link to comment Share on other sites More sharing options...
Maude Posted April 4, 2015 Share Posted April 4, 2015 My Perfect Ten Mini-rig did this a few weeks ago, blowing replacement fuses on power up. Looks like a common Ashdown fault then. Just need to find someone to look at it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.