Acebassmusic Posted March 5, 2014 Share Posted March 5, 2014 (edited) I have a QSC PLX1602 power amp for sale. In very good condition, little use and no abuse. I have owned it from new and looking for [s]£275[/s] [color=#ff0000][b]£250[/b][/color] plus shipping from Aberdeen. The equivalent new currently cost approx £500. I have a total of 3 power amps for sale on the site here. Here are the specs for the QSC: [url="http://roadhogs.net/dq_manuals/QSC_plxuser.pdf"]http://roadhogs.net/...QSC_plxuser.pdf[/url] The rack cases have been sold so no longer available. [s]I really should have dusted the top better before taking the photos! It looks much worse than it is......better pics to follow I think[/s] Now dusted! Edited May 1, 2014 by Acebassmusic Link to comment Share on other sites More sharing options...
Guest bassman7755 Posted March 11, 2014 Share Posted March 11, 2014 (edited) Its worth noting that the PLX range are the "mid weight" range i.e. 10kg or so much lighter than a typical old school amp of this sort of power. Its 500 damping factor, 25hz HPF and ability to drive 4ohm in bridge and make it ideal for bass rigs where you want to drive stacks of well controlled power into speakers without any damaging sub sonics. Its basically THE go-to amp for building a modular bass rig. Edited March 11, 2014 by bassman7755 Link to comment Share on other sites More sharing options...
Sharkfinger Posted March 14, 2014 Share Posted March 14, 2014 ^^ What he said. Fantastic amp. Kinda still wish I had mine. Hmmmm..... Link to comment Share on other sites More sharing options...
NancyJohnson Posted March 15, 2014 Share Posted March 15, 2014 Can I ask a question here. (I know so little about impedance.) If you're running this in bridged mono, are both Speakon outputs active? I'm running a pair of Hartke Hydrives which are both rated 8ohms...one in each output or daisychained? P Link to comment Share on other sites More sharing options...
Acebassmusic Posted March 15, 2014 Author Share Posted March 15, 2014 I am assuming you have 2 x Hydrive 410 (1000 Watt @ 4 ohm) In bridged mono mode the QSC only uses Chan 1 and provides 1600 watts @ 4 ohms & 1000 watts @8 ohms. You could run a bridged speakon cable from Chan 1 of the amp to your first cab and then a standard speakon from Cab 1 to Cab 2 (daisy chained). This would give you the full 1600 watts at 4 ohms. The sound would be mahoosive! Hope that helps Link to comment Share on other sites More sharing options...
Acebassmusic Posted May 1, 2014 Author Share Posted May 1, 2014 SOLD Link to comment Share on other sites More sharing options...
.thumb.jpg.16ee4b95eaee4b6897a6ffa64c6371da.jpg)
Recommended Posts