DanEly Posted September 24, 2013 Share Posted September 24, 2013 (edited) [size=4]Not using this since I got my Ampeg SVT VR so she deserves a new home [size=3][size=4]Here's what ampeg say about it[/size] [size=4]Ampeg’s SVT-6PRO combines all the beautiful tone of tubes with the solid-state reliability of a MOSFET output stage, to provide massive output and a virtually unlimited tone palette. An onboard 4-Band Semi-Parametric EQ section gives you +/-18dB of adjustment per band, so you can dial in even the most subtle tonal nuances. And the power amp section delivers a whopping 1100 watts RMS at 4 ohms! SVT-6PRO also features built-in Compression at the input stage, and a Tube Voltage control for adjusting the response of the power amp driver tubes.[/size] [b]RMS Power Output (8 Ohms)[/b]: 750-Watts [b]RMS Power Output (4 Ohms)[/b]: 1100-Watts [b]Preamp[/b]: Tubes (2 x 12AX7)[/size][/size] [size=3][b]Driver Tubes[/b]:[/size] 2 x 12AU7, 2 x 12AX [size=3]Tube Voltage Control[/size] It's used, carries a few battle scars and a little beaten up It could probably benefit from a service. Everything's working as it should though. It sounds fantastic. With 4 sweepable mid ranges its been one of the most versatile amps I've ever owned. [url="http://www.flickr.com/photos/danely/9923852434/"][/url] [url="http://www.flickr.com/photos/danely/9923852664/"][/url] Edited January 25, 2014 by DanEly Link to comment Share on other sites More sharing options...
DanEly Posted September 27, 2013 Author Share Posted September 27, 2013 Take her away Link to comment Share on other sites More sharing options...
DanEly Posted September 29, 2013 Author Share Posted September 29, 2013 Up Link to comment Share on other sites More sharing options...
JapanAxe Posted September 29, 2013 Share Posted September 29, 2013 Dan what is the depth of the casing front to rear (excluding knobs, handles etc). Cheers Link to comment Share on other sites More sharing options...
DanEly Posted September 29, 2013 Author Share Posted September 29, 2013 [quote name='JapanAxe' timestamp='1380471662' post='2225756'] Dan what is the depth of the casing front to rear (excluding knobs, handles etc). Cheers [/quote] I make it 39cm or 41cm including the rear rack ears Link to comment Share on other sites More sharing options...
DanEly Posted October 2, 2013 Author Share Posted October 2, 2013 Make me a offer Link to comment Share on other sites More sharing options...
DanEly Posted October 5, 2013 Author Share Posted October 5, 2013 t o p Link to comment Share on other sites More sharing options...
dezz666 Posted October 11, 2013 Share Posted October 11, 2013 Where are you based pal Link to comment Share on other sites More sharing options...
DanEly Posted October 11, 2013 Author Share Posted October 11, 2013 [quote name='dezz666' timestamp='1381494354' post='2239831'] Where are you based pal [/quote] Pm'd Link to comment Share on other sites More sharing options...
DanEly Posted October 17, 2013 Author Share Posted October 17, 2013 Still a'bout Link to comment Share on other sites More sharing options...
TomWIC Posted October 18, 2013 Share Posted October 18, 2013 I want! will you accept kidneys at all? Link to comment Share on other sites More sharing options...
DanEly Posted October 18, 2013 Author Share Posted October 18, 2013 Unfortunately the old kidneys are ticking over nicely at the mo! Link to comment Share on other sites More sharing options...
DanEly Posted October 24, 2013 Author Share Posted October 24, 2013 Bump Link to comment Share on other sites More sharing options...
DanEly Posted October 24, 2013 Author Share Posted October 24, 2013 Some interest, nothing set in stone yet. Up Link to comment Share on other sites More sharing options...
Me And My Bass Posted October 25, 2013 Share Posted October 25, 2013 Pm sent Link to comment Share on other sites More sharing options...
DanEly Posted October 27, 2013 Author Share Posted October 27, 2013 [quote name='Me And My Bass' timestamp='1382712784' post='2255821'] Pm sent [/quote] Replied good sir Link to comment Share on other sites More sharing options...
TBString58 Posted October 27, 2013 Share Posted October 27, 2013 Where are you based kind sir? Link to comment Share on other sites More sharing options...
DanEly Posted October 27, 2013 Author Share Posted October 27, 2013 [quote name='TBString58' timestamp='1382886489' post='2257553'] Where are you based kind sir? [/quote] RH16 2SL West Sussex Link to comment Share on other sites More sharing options...
DanEly Posted October 29, 2013 Author Share Posted October 29, 2013 Part ex for a Epiphone Ripper bass Link to comment Share on other sites More sharing options...
shemeckfrac Posted October 30, 2013 Share Posted October 30, 2013 Hmmm.. I'm based near Lindfield. Is it still for sale ? Link to comment Share on other sites More sharing options...
DanEly Posted November 2, 2013 Author Share Posted November 2, 2013 [quote name='shemeckfrac' timestamp='1383138241' post='2260611'] Hmmm.. I'm based near Lindfield. Is it still for sale ? [/quote] Drop me a PM! Link to comment Share on other sites More sharing options...
DanEly Posted November 7, 2013 Author Share Posted November 7, 2013 T O P Link to comment Share on other sites More sharing options...
DanEly Posted November 9, 2013 Author Share Posted November 9, 2013 Make me some offers, interested in compact/lightweight heads and anything with 4 strings Link to comment Share on other sites More sharing options...
DanEly Posted November 11, 2013 Author Share Posted November 11, 2013 To the very top Link to comment Share on other sites More sharing options...
TomWIC Posted November 11, 2013 Share Posted November 11, 2013 Bahhhhh, stop teasing me! Still trying to find the cash haha. Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts