orangepeelneil Posted June 16, 2013 Share Posted June 16, 2013 (edited) Found all these bits when I was having a sort out, I won't use it again but someone may find it all useful. All from my brief journey into DIY stompboxes, many years ago. [u]5 Enclosures.[/u] -Gold painted aluminium box, drilled for jacks, footswitch and pot.four rubber feet underneath. -Yellow and Orange base Hammond box, drilled for jacks,pot,led and footswitch -Pale blue/grey diecast box undrilled. -recycled white primer hammond diecast box -undrilled, unpainted hammond diecast box with ears ( can be sawed off) [u]Components,parts etc[/u] 10x PP3 batter snap connectors. 1x unknown original ( made in Japan) Fuzz or distortion PCB. This is a high gain circuit and does work, but need pots, jacks etc. (the circuit will have to worked out) 1x EH LPB-1 (2N5089)booster circuit on veroboard, with millennium FET circuit for using LED with 2 way footswitch. All the bits are here and it did work, also has a muff switched feedback circuit. 1x EH LBP-1 (2N5089) booster circuit =just components on veroboard [u]Other[/u] Fender EQUALIZER amplifier footswitch £20 posted in UK for the lot as a paypal gift. Edited June 16, 2013 by orangepeelneil Link to comment Share on other sites More sharing options...
topo morto Posted June 16, 2013 Share Posted June 16, 2013 pm'd Link to comment Share on other sites More sharing options...
orangepeelneil Posted June 17, 2013 Author Share Posted June 17, 2013 Sold Link to comment Share on other sites More sharing options...
Recommended Posts