Jump to content
Why become a member? ×

Orange AD200 popping?


jacmksoncaddy
 Share

Recommended Posts

Morning guys,

Just a quick one here. I have a Orange AD200 bought new last December. Its used heavily and pushed hard, but its always left to warm up properly etc. When hitting the low E (especially when dropped to D or C sharp) it makes an intermittent popping noise as you strike the string? All other strings seem ok - just the low end that seems to be an issue.

The sound is exactly like when a string touches a pick up magnet (but its not this). Does anyone have any idea? I am running it with two Orange Cabs - a 410 and a 115.

I am going on tour in May and I really don't want it letting me down :-/

Any advice is much appreciated!

Link to comment
Share on other sites

Bad valve is first thing I'd expect, can check by dinging the valves with a chopstick, see if one is being noisy, and swap them about with a known good one. Bust solder joint because of all the board mount stuff is next expectation, pretty likely with the way the Oranges are made, so really, its a 'design feature' and part of the 'Orange tone', because it isn't like those heads aren't expensive enough to be made in a way where that is less of a risk.

Link to comment
Share on other sites

[quote name='Mr. Foxen' timestamp='1366292298' post='2050606']
pretty likely with the way the Oranges are made, so really, its a 'design feature' and part of the 'Orange tone', because it isn't like those heads aren't expensive enough to be made in a way where that is less of a risk.
[/quote]

:lol: :lol: :lol:
(Here, they go for a mere £2K)

best,
bert

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...