MiltyG565 Posted February 9, 2013 Share Posted February 9, 2013 So yeah, i've just got my OLP (Which shall be known as a MiltyMan from now on) all wired up and screwed together. So since my jazz bass was sitting in several bits already, i decided while i was at it, i'll stick some new pots on (500k CTS, instead of the 250k unbranded ones that came with it)... and then i also decided to wire it in series. It's wired and all. But the pot change was awkward, more on that in a little minute. Have any of you ever wired you jazz bass in series? what do you think? Oh sh*t, i just thought... one of the pickups is reverse wound, isn't it? will that affect things? Anyway, the pots. It turns out that the control plate had mini pots (GRRR)... and the pots that i had were regular sized ones. Ah well, they should still fit in the cavity. So i tore on. Took off the old volume pots, wire the - and + together, put the new pots on and... they didn't fit in the holes of the original pots. I drilled them out. Top job. Screwed the pots in, and once again, the control knobs didn't fit! Why do you do this to me, God, why!? Anyway, here's what i'm thinking now- since the control plate is all scratched up anyway, i want to put a black one on. Not just black... MATTE black And of course that then means that ALL the hardware has to be matte black (including the pick guard), so now this has gone from a simple upgrade, to a full blown project. I should also be getting another neck for it soon. This bass will be the epitome of cool when it's done, just wait Quote Link to comment Share on other sites More sharing options...
lettsguitars Posted February 9, 2013 Share Posted February 9, 2013 Pickups are never 'reverse wound'. They just use opposite ends of the coil as the hot wire. The pickups are actually probably out of phase now, in that the magnet poles are the same way up. Both north up for instance. Get a compass and check the polarity. The pickups need to have opposite polarity. One north up and the other south up. Quote Link to comment Share on other sites More sharing options...
MiltyG565 Posted February 9, 2013 Author Share Posted February 9, 2013 [quote name='lettsguitars' timestamp='1360452206' post='1970807'] Pickups are never 'reverse wound'. They just use opposite ends of the coil as the hot wire. The pickups are actually probably out of phase now, in that the magnet poles are the same way up. Both north up for instance. Get a compass and check the polarity. The pickups need to have opposite polarity. One north up and the other south up. [/quote] Ah right, cheers for that! Is there any way to correct the polarity, like switching what lead i have connected to the first pickup? Quote Link to comment Share on other sites More sharing options...
lettsguitars Posted February 9, 2013 Share Posted February 9, 2013 (edited) Turn the pickup upside down? They may be alright anyway. If they sound alright then that's all that matters. Edited February 9, 2013 by lettsguitars Quote Link to comment Share on other sites More sharing options...
MiltyG565 Posted February 9, 2013 Author Share Posted February 9, 2013 [quote name='lettsguitars' timestamp='1360452586' post='1970814'] Turn the pickup upside down? They may be alright anyway. If they sound alright then that's all that matters. [/quote] But being out of phase would just mean they sound slightly out of phase? it sounded like that already. Quote Link to comment Share on other sites More sharing options...
lettsguitars Posted February 9, 2013 Share Posted February 9, 2013 Maybe they were out of phase then. It would sound like the bass fighting itself if you know what I mean. Kinda thin and distant. Quote Link to comment Share on other sites More sharing options...
MiltyG565 Posted February 9, 2013 Author Share Posted February 9, 2013 [quote name='lettsguitars' timestamp='1360453386' post='1970830'] Maybe they were out of phase then. It would sound like the bass fighting itself if you know what I mean. Kinda thin and distant. [/quote] Ah right... i might need to think about this then a little bit more. Quote Link to comment Share on other sites More sharing options...
lettsguitars Posted February 10, 2013 Share Posted February 10, 2013 Just get any old magnet and hold it above the pickups. If it repels on one and attracts on the other you're good. If it behaves the same way over both then all you can do is wire them paralell, or like I say, flip one over if possible. Unless of course you think it kinda works as it is. Quote Link to comment Share on other sites More sharing options...
Beer of the Bass Posted February 10, 2013 Share Posted February 10, 2013 (edited) It's really noticeable when pickups are out of phase - usually two pickups in parallel and in phase will thin out and scoop the mids a little, but out of phase is a whole lot quieter with almost no low end. The simplest way to tell is to reverse the two wires from one pickup; one way round will be much louder and better sounding and this is when they are in phase. Pairs of Jazz pickups usually have opposite magnetic polarity and one coil reverse wired so that they will cancel hum but still have the output in phase. This works in both series and parallel. Regarding using series wiring on with Jazz pickups, I had a switch on mine to put the pickups in series and I found I never used it. Some people say the sound resembles a Precision, but to me it was just a bit thicker and sort of indistinct sounding, but still with the character of a Jazz bass in the highs. Edited February 10, 2013 by Beer of the Bass Quote Link to comment Share on other sites More sharing options...
MiltyG565 Posted February 10, 2013 Author Share Posted February 10, 2013 [quote name='Beer of the Bass' timestamp='1360529415' post='1971931'] It's really noticeable when pickups are out of phase - usually two pickups in parallel and in phase will thin out and scoop the mids a little, but out of phase is a whole lot quieter with almost no low end. The simplest way to tell is to reverse the two wires from one pickup; one way round will be much louder and better sounding and this is when they are in phase. Pairs of Jazz pickups usually have opposite magnetic polarity and one coil reverse wired so that they will cancel hum but still have the output in phase. This works in both series and parallel. Regarding using series wiring on with Jazz pickups, I had a switch on mine to put the pickups in series and I found I never used it. Some people say the sound resembles a Precision, but to me it was just a bit thicker and sort of indistinct sounding, but still with the character of a Jazz bass in the highs. [/quote] A switch could be a good idea actually. And that would leave it that you still had independent volume controls in parallel? Quote Link to comment Share on other sites More sharing options...
Beer of the Bass Posted February 10, 2013 Share Posted February 10, 2013 (edited) I wired mine like this with a push-pull pot, but you could also substitute a DPDT mini toggle for the switch: [url="http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=jass_bass_sp"]http://www.seymourdu...ic=jass_bass_sp[/url] In series mode there is just one volume control for both pickups, plus the master tone. In parallel it's a normal Jazz with independent volumes. Edited February 10, 2013 by Beer of the Bass Quote Link to comment Share on other sites More sharing options...
MiltyG565 Posted February 10, 2013 Author Share Posted February 10, 2013 [quote name='Beer of the Bass' timestamp='1360531710' post='1971995'] I wired mine like this with a push-pull pot, but you could also substitute a DPDT mini toggle for the switch: [url="http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=jass_bass_sp"]http://www.seymourdu...ic=jass_bass_sp[/url] In series mode there is just one volume control for both pickups, plus the master tone. In parallel it's a normal Jazz with independent volumes. [/quote] That's great! Yes, i don't mind it having a single volume control in series. I might actually get other parts first, then get my dad to make me a new control plate, then i'll wire it all up! I want the parts to be matte black. Quote Link to comment Share on other sites More sharing options...
brensabre79 Posted February 11, 2013 Share Posted February 11, 2013 I've got this on my main Jazz, Fender did it for a while (its called an S-1 switch) it's definitely better as an option as opposed to a permanent thing, it makes the bass a bit louder, a bit fuller but a bit darker sounding - no fizzy top end if you know what I mean. But it comes in handy when you want a small level boost, or if you want to make your Jazz sound like a Precision Quote Link to comment Share on other sites More sharing options...
Dr M Posted February 11, 2013 Share Posted February 11, 2013 Did the same on a Squier Jazz using a push-pull pot. As above, you'll find the output is a lot hotter and darker, but I personally didn't think it sounded very much like a precision. The series wiring didn't really give me the thick mids I associate with a precision sound. That being said, I was only using the stock Squier pickups that leave something to be desired, so your experience might be different. Quote Link to comment Share on other sites More sharing options...
lettsguitars Posted February 11, 2013 Share Posted February 11, 2013 (edited) You'll never make a jazz sound like a precision, of that I'm certain. The bridge pup has a sound of it's own and there's twice as many magnets and twice as much coil. Actually no, there is nearly 4x the amount of coil. Edited February 11, 2013 by lettsguitars Quote Link to comment Share on other sites More sharing options...
Dr M Posted February 11, 2013 Share Posted February 11, 2013 [quote name='lettsguitars' timestamp='1360604035' post='1973193'] You'll never make a jazz sound like a precision, of that I'm certain. The bridge pup has a sound of it's own and there's twice as many magnets and twice as much coil. Actually no, there is nearly 4x the amount of coil. [/quote] I would imagine the pickup locations are also a factor in this. The two separate pickups would mean you're picking up two distinct areas of string vibration, neither of which matches the precision pickup 'sweet spot'. Quote Link to comment Share on other sites More sharing options...
Rumple Posted February 11, 2013 Share Posted February 11, 2013 I put a series switch on a 5 string Jazz bass I had and I really likes the 'bigger' sound it produced. Quote Link to comment Share on other sites More sharing options...
MiltyG565 Posted February 12, 2013 Author Share Posted February 12, 2013 Yes, as i'm sure most of you will agree, a jazz can sound... thin, especially with the lack of mids in there. You can get alot of bit from the bridge, and alot of thump from the mid pickup, but it just always seems to have the one flat response through the mids then either treble or bass either end of it. I want the mids that being in series should bring. I had another idea to make a jazz body, but put a MM pickup between the standard single coil pickups. MM in series, single coils in para/series switchable? Let's go further. How about stacked single coils, so they are also hum buckers in there own right? Wow, i really need mental help Having this much time on your hands isn't good for the wallet Quote Link to comment Share on other sites More sharing options...
brensabre79 Posted February 12, 2013 Share Posted February 12, 2013 [quote name='Dr M' timestamp='1360607296' post='1973291'] I would imagine the pickup locations are also a factor in this. The two separate pickups would mean you're picking up two distinct areas of string vibration, neither of which matches the precision pickup 'sweet spot'. [/quote] I think the "sweet spot" thing is a bit of a myth to be honest, the sweet spot changes when you fret a note as you shorten the string length. OK if you put Jazz pickups in series next to a Precision its not going to sound exactly the same. But the sound of the two jazz pickups in series is MORE Precision like than in parallel. More mids, more thump, less brightness. I was trying to describe the sound using references that anybody can relate to. If you want your Jazz bass to sound exactly like a Precision, then swap the neck pickup for a P unit. But I do get quite a Precisiony sound from mine (70s spacing and quite middly custom wound pickups though). Milty, I think that the benefits you will reep from adding a MM pickup in between the two jazz pickups are outweighed by the cost and hassle of doing it. I think you'll get roughly the same sort of sound by blending the two Jazz pickups, turning your preamp up and EQing a little. But thats just my opinion, don't let me put you off experimenting! Quote Link to comment Share on other sites More sharing options...
MiltyG565 Posted February 12, 2013 Author Share Posted February 12, 2013 [quote name='brensabre79' timestamp='1360677878' post='1974416'] Milty, I think that the benefits you will reep from adding a MM pickup in between the two jazz pickups are outweighed by the cost and hassle of doing it. I think you'll get roughly the same sort of sound by blending the two Jazz pickups, turning your preamp up and EQing a little. But thats just my opinion, don't let me put you off experimenting! [/quote] Really? There is no preamp. I was thinking of sorting thing bass, then building another Jazz from scratch with the MM pickup. Maybe even back mounted pots... now i'm really excited! Quote Link to comment Share on other sites More sharing options...
brensabre79 Posted February 12, 2013 Share Posted February 12, 2013 I meant the preamp on your amp Quote Link to comment Share on other sites More sharing options...
MiltyG565 Posted February 12, 2013 Author Share Posted February 12, 2013 [quote name='brensabre79' timestamp='1360680437' post='1974488'] I meant the preamp on your amp [/quote] Ah, that makes more sense Quote Link to comment Share on other sites More sharing options...
Dr M Posted February 12, 2013 Share Posted February 12, 2013 [quote name='brensabre79' timestamp='1360677878' post='1974416'] I think the "sweet spot" thing is a bit of a myth to be honest, the sweet spot changes when you fret a note as you shorten the string length. [/quote] I know the whole 'sweet spot' idea is contentious at best - I simply meant that pickup location has a [i]huge[/i] impact on tone. The Jazz neck pickup isn't quite in the same location as the traditional Precision pickup, so you're never going to get quite the same sound out of them. Quote Link to comment Share on other sites More sharing options...
paul_5 Posted February 12, 2013 Share Posted February 12, 2013 [quote name='lettsguitars' timestamp='1360604035' post='1973193'] You'll never make a jazz sound like a precision, of that I'm certain. The bridge pup has a sound of it's own and there's twice as many magnets and twice as much coil. Actually no, there is nearly 4x the amount of coil. [/quote] I reckon I'm close - I've got a MM in the bridge position and a Jazz neck PUP. I use a volume, blend, tone configuration on the control plate and if I blend 70/30 in favour of the Neck, and then use the canny little 'phase reverse' switch on the neck pup then it's Precision-tastic! Isa little bit on onboard EQ considered cheating? Quote Link to comment Share on other sites More sharing options...
MiltyG565 Posted February 13, 2013 Author Share Posted February 13, 2013 HANG ON! that series/parallel switch, will that work without the polarity of one of the pickups being reversed? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.