thinman Posted February 2, 2013 Share Posted February 2, 2013 I'd assumed that the EHX bass synth was genuinely straight through when not on but mine sounds like it's being over-driven by my Sterling. It's OK with a passive bass with lower output. Has anyone experienced this? Obviously I cam turn the bass down a bit but I wondered about putting an attenuator in-line so I don't have to worry about turning up too much. Has anyone seen an in-line attenuator with 1/4" jack connectors? Quote Link to comment Share on other sites More sharing options...
paul_5 Posted February 2, 2013 Share Posted February 2, 2013 Could you not strap a voltage divider across the input? Or a cheap compressor might help. Quote Link to comment Share on other sites More sharing options...
thinman Posted February 2, 2013 Author Share Posted February 2, 2013 [quote name='paul_5' timestamp='1359828129' post='1960916'] Could you not strap a voltage divider across the input? Or a cheap compressor might help. [/quote] I suppose I could make my own inline - I'll look up a "T" pad. Quote Link to comment Share on other sites More sharing options...
dudewheresmybass Posted February 3, 2013 Share Posted February 3, 2013 This should do the job http://www.effectpowersupplies.com/electro-harmonix-signal-pad-427-p.asp Quote Link to comment Share on other sites More sharing options...
Fionn Posted February 3, 2013 Share Posted February 3, 2013 Is there a wee internal trim pot on the circuit-board of the pedal (or your Sterling, for that matter). If so, try adjusting that first. Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.