Onox Posted July 29, 2012 Share Posted July 29, 2012 Hey Guys, I need some advice. I´m using a Q-tron+ in a Gigrig Quartermaster Looper witch sounds good but it has a huge volume-jump, witch is realy annoying. I thought about placing another pedal after the Q-tron in the Loop for turning the volume down (with a clean sound/no tone-eaters). A standard Volume Pedal is too big and unpracticabel for a "set and forget"-thing. Any Ideas for alternativ solutions? I also thoght about the Boss LS-2 but isn´t it worse to place a pedal in a loop in a loop? What about a Boss LMB3 or a GEB7? Both got a Level-Control to cut the Volume. Thanks for your opinion! Quote Link to comment Share on other sites More sharing options...
umph Posted July 29, 2012 Share Posted July 29, 2012 drill a hole, wire in a volume pot. tis a cheaper solution Quote Link to comment Share on other sites More sharing options...
paul_5 Posted July 29, 2012 Share Posted July 29, 2012 [quote name='umph' timestamp='1343570970' post='1752165'] drill a hole, wire in a volume pot. tis a cheaper solution [/quote] True dat. Quote Link to comment Share on other sites More sharing options...
Gareth Hughes Posted July 29, 2012 Share Posted July 29, 2012 [quote name='umph' timestamp='1343570970' post='1752165'] drill a hole, wire in a volume pot. tis a cheaper solution [/quote] +1 to this. Did this with both my Mini Q-Tron's - works a treat. Quote Link to comment Share on other sites More sharing options...
Onox Posted July 29, 2012 Author Share Posted July 29, 2012 Mh, I dont got the talent to do this. Also I would prefer keep the Pedal full original. Quote Link to comment Share on other sites More sharing options...
Onox Posted July 29, 2012 Author Share Posted July 29, 2012 I think the EHX Signal Pad is what I was looking for: [url="http://www.ehx.com/products/signal-pad"]http://www.ehx.com/products/signal-pad[/url] Quote Link to comment Share on other sites More sharing options...
bass_ennyday Posted August 28, 2012 Share Posted August 28, 2012 my solution: if you don´t use the effect loop on your Q-Tron+ then put a potentiometer-box between send/return ... looks like this: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.