Jump to content
Why become a member? ×

P/J pickup sets (Nordstrand, EMG), bridges, circuits etc


Recommended Posts

Selling some kit to fund yet another custom build…….

All prices include postage, payment by cheque or PayPal (but if p/p either pay fees or mark as gift please)

First off, boxed set of Nordstrand NPJ4SE pickups (matched P & J), briefly fitted to a custom that I’m totally re-designing so they’re in as new condition.
All screws and support pads included.

I’ve tried most of the boutique “vintage” Fender pickups, and these just lovely, definitely my favourite, details here; http://www.nordstrandpickups.com/bass-pickups/traditional/

These are £217 shipped from Bass Direct ( http://www.bassdirect.co.uk/bass_guitar_specialists/Nordstrand_Pickups.html ) – how about £110 posted, for a saving of over £100? *SOLD PENDING*

Edited by Shaggy
Link to comment
Share on other sites

Just found I've used my maximun picture upload space so hang on a bit for rest of gear while I figure out how to delete old stuff......Sorry!


Edit; OK, I give up. Anyone able to tell me how to do this please? It was easy on the "old" site!

Edited by Shaggy
Link to comment
Share on other sites

[quote name='Pete1967' timestamp='1338741304' post='1678707']
I'll have these please... PM'd

My settings, manage content, to delete pics BTW
[/quote]

p/ups on hold

Thanks for tip Pete, but I still can't see how to do it either in Settings or My Content....Grrrrrrr!!!! :-(

Link to comment
Share on other sites

Cheers Greg... PM replied.

If I click on my user name then go to my settings I get a menu on the left... One of the items is manage attachments (not content as above, my bad). That sorts me select and delete pics. Perhaps you have to enable it somewhere.... :-/

Link to comment
Share on other sites

Early ‘80’s (?) 4-string bridge with massive solid brass “keyhole” saddles; really chunky heavy-duty unit, had from US eBay.

Note this is for stringing body-thru ONLY, not only that but the holes in the base are staggered to compensate for the intonation stagger and maintain a consistent string break angle across all 4 strings (Fender / MusicMan / Gibson – how come you couldn’t do that?) so in the unlikely event this is for a direct replacement you’d need to drill the holes appropriately. Fab for a custom build, or upgrade to a bass you didn’t mind drilling!

£20 posted

Link to comment
Share on other sites

Generic (Gotoh?) high-mass bridge, direct 5-hole Fender replacement. Nicely heavy and chunky, chrome in good nick, and keeps the ball-ends of your strings neatly out of sight……(ooh! suit you Sir!)

£10 posted

Link to comment
Share on other sites

Quality solder-less P bass wiring harness – suitable for any single-pickup bass of course.

CTS pots (250K x 2) with solid smooth shafts, Suntan 2G437K drop capacitor, heavy duty wire, colour-coded mini screw terminals (black “earth” / white “hot”)

£10 posted

Link to comment
Share on other sites

Goldo (German) soapbar 5-string pickups (100 x 37 mm) and 2-band active EQ circuit; passive mode selected by pull switch on rear volume control. Decent p/ups and preamp, great for a custom build or an upgrade.

OE on my 2005 Paulman 5, but I’m upgrading to an East U-retro and US Kent Armstrongs. Still in the bass as I haven’t had the KA’s yet, but if anyone wants I’ll take straight out.

£50 for full system (but battery compartment not included) posted

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...