Faithless Posted August 1, 2012 Share Posted August 1, 2012 So I had a few practice sessions using this MBE thing and while's the thing REALLY loud (I hardly turn on Gain and Master on my Aguilar TH500 at all to dial out quite a bit of volume..), the weird thing is that I have to open up the lower ring on my ACG preamp to dial in the high range - and on most other cabs, at the point where I have my preamp set now, the sound would be really harsh and screechy, but with this cab it's not.... Are these cabs known for cutting off the Treble/High Mids range? Just to keep in mind, I set my Aggie TH500's EQ flat, but I'm doing the same thing with all other cabs I tend to use. L Quote Link to comment Share on other sites More sharing options...
MarshallBTB Posted August 1, 2012 Author Share Posted August 1, 2012 (edited) Could be the cheaper tweeter? Is yours set on? Saying that I do end up boosting the treble on my bass but I did the same with my other cab, seems fine at home but needed a treble boost when with the band. Edited August 1, 2012 by MarshallBTB Quote Link to comment Share on other sites More sharing options...
Dave Tipping Posted August 1, 2012 Share Posted August 1, 2012 .. It'll be the boomy unbraced / dampned cab you're trying to counteract ... on a serious note I used to dial the bass off and boost the treble / mid on my orange before I did the mod. Now I run a pretty flat eq. Quote Link to comment Share on other sites More sharing options...
MarshallBTB Posted August 2, 2012 Author Share Posted August 2, 2012 On that subject, my wadding turned up yesterday so expect a build thread over the weekend! Quote Link to comment Share on other sites More sharing options...
ialma Posted January 23, 2013 Share Posted January 23, 2013 build thread please Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.