Owen Posted August 29, 2011 Share Posted August 29, 2011 I have a small PA system which I no longer need. It consists of two Mackie SRM350 powered 10" + Horn cabs (inc cases) and a db Technologies SUB 12 Active Subwoofer - 1x 12", 400 watts RMS amp, 40-150Hz, 127dB max SPL, 2x XLR/jack inputs, 2x XLR parallel outputs, 2x XLR HF outputs, dynamic limiter. Dimensions (WxDxH) 520x360x500mm. Weight: 22 kg. There is a stereo crossover in the sub so you plug your mixer into that and then from that into the Mackies. It is a light and useful rig. It will not fill the Albert Hall, but it is fine and dandy for vocals and sax sort of thing for a function band. I am not including stands or leads with these, but could for extra wonga if you wanted them. £700 delivered to your door. Link to comment Share on other sites More sharing options...
Owen Posted September 2, 2011 Author Share Posted September 2, 2011 £650 bump Link to comment Share on other sites More sharing options...
timmchale2009 Posted September 5, 2011 Share Posted September 5, 2011 [quote name='owen' post='1360010' date='Sep 2 2011, 03:51 PM']£650 bump[/quote] Would you sell the sub separate? If So how much? Tim Link to comment Share on other sites More sharing options...
Owen Posted September 5, 2011 Author Share Posted September 5, 2011 (edited) £200 + carriage or you are welcome to pick it up Edited September 5, 2011 by owen Link to comment Share on other sites More sharing options...
timmchale2009 Posted September 5, 2011 Share Posted September 5, 2011 [quote name='owen' post='1363367' date='Sep 5 2011, 08:14 PM']£200 + carriage or you are welcome to pick it up [/quote] I'm going to mull this over, where abouts are you based? Link to comment Share on other sites More sharing options...
Owen Posted September 5, 2011 Author Share Posted September 5, 2011 [quote name='timmchale2009' post='1363424' date='Sep 5 2011, 08:44 PM']I'm going to mull this over, where abouts are you based?[/quote] I'm in Bangor, but can get it across to Mold if that make things easier. Link to comment Share on other sites More sharing options...
Owen Posted September 13, 2011 Author Share Posted September 13, 2011 Bump Link to comment Share on other sites More sharing options...
Recommended Posts