sk8 Posted August 17, 2011 Share Posted August 17, 2011 I've used the zoom for gigs for the past 6 months or so and use an external switch to bypass it. Its worked fine until this weekend. Now when i use my external switch to put the unit in bypass it also mutes the output so i get nothing out. Took me a while to twig this! Disconnected the switch and when i hit the two patch buttons it goes into bypass but lets the signal through, connect up the switch to bypass it and it mutes it to. Had a look in the manaul but can't figure out whats gone wrong or what i need to do to fix it Any help appreciated Quote Link to comment Share on other sites More sharing options...
cheddatom Posted August 17, 2011 Share Posted August 17, 2011 Weird. The manual refers to the function as "bypass/mute" but doesn't say how to switch between the two. It shows you how to set the footswitch to engage bypass/mute but I guess you knew that. Quote Link to comment Share on other sites More sharing options...
sk8 Posted September 15, 2011 Author Share Posted September 15, 2011 Sorted! Found the issue. My footswitch has a switch i had accidently moved which turned it into a latching switch so when pressd it had the same effect as pressing and holding the switch so it went into mute mode. Switched it back and its working as it used to DOH! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.