dodgnofski Posted June 5, 2011 Share Posted June 5, 2011 Hi Guys, Any suggestions on how I can use two amps without getting the 'buzzing sound' - do I use the D.I. out of one amp into the main input of the other? I tried to connect the tuner output from one amp to the main input of the other - but it was very noisy? Thanks Quote Link to comment Share on other sites More sharing options...
ThomBassmonkey Posted June 5, 2011 Share Posted June 5, 2011 Best bet would be to split the signal before it goes in. Quote Link to comment Share on other sites More sharing options...
chris_b Posted June 5, 2011 Share Posted June 5, 2011 (edited) You could use a split guitar lead or connect the amps using SEND on one to RETURN on the other. This will bypass the the pre amp on the second amp. On the other hand it might be better to get a more powerful amp. There are some very cheap Markbass 500 watt amps around at the moment. Edited June 5, 2011 by chris_b Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted June 5, 2011 Share Posted June 5, 2011 Something like the Sansamp Bass Driver I believe enables the connection to two amps. Quote Link to comment Share on other sites More sharing options...
dodgnofski Posted June 10, 2011 Author Share Posted June 10, 2011 Thanks Guys, I've linked them by connecting the effects send from the first amp, to the effects return of the second amp as suggested & I can even use the EQ on both amps with no hum or noise whatsoever!! - just 'how good' is Basschat & 'you Guys' !! Thanks again, Tim Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.