the hand of john curley Posted December 23, 2010 Share Posted December 23, 2010 Hello One & All. Need some advice please! - I want to screen the cavity and the scratch plate on an old bass I have and a mex telecaster guitar.....Do i need to earth anything ?? I know its a daft question but I really don't know! - Is it something that I should get my repair shop to do instead? Thanks very much Matt Quote Link to comment Share on other sites More sharing options...
Mr. Foxen Posted December 23, 2010 Share Posted December 23, 2010 All of the copper needs to be earthed, and connected to each other piece, if it isn't the stuff with conductive glue. Really, you need to check it all for continuity with a meter once it is all in. Easier using paint. Quote Link to comment Share on other sites More sharing options...
essexbasscat Posted December 23, 2010 Share Posted December 23, 2010 Have a look at GuitarNuts.com Shielding is fully explained there, albeit on Stratocasters. The key principles are well explained, along with some helpful tips. I've had some success obtaining graphite paint from evil bay, which creates an electrically conductive layer when painted onto the control cavity. Much easier than trying to fit copper to the contours. Good luck with your project T Quote Link to comment Share on other sites More sharing options...
RhysP Posted December 23, 2010 Share Posted December 23, 2010 Copper Shielding: Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.