oldslapper Posted October 23, 2010 Share Posted October 23, 2010 (edited) I bought a Spector NS94 and the bass extender doesn't work, not worried as I would never use it. I've tried to remove the machine head from the headstock. But the screw head that holds it to the rear of the headstock is completely covered by the extender part. It has a "cap", which if I could get off I could get to the screw head, but I can't remove the cap at at all. Very annoying! Problem is that the machine head has developed an annoying rattle due to the extender not fitting properly. Any clues before I take this to a tech and spend a load of money I don't have? Many thanks John Edited October 23, 2010 by oldslapper Quote Link to comment Share on other sites More sharing options...
Mr. Foxen Posted October 23, 2010 Share Posted October 23, 2010 Does the lever have a hole in for an allen key? Removing that should allow the whole tuner part to free rotate and move out of the way. Quote Link to comment Share on other sites More sharing options...
BottomEndian Posted October 23, 2010 Share Posted October 23, 2010 Have you dismantled the whole Xtender assembly? It's just a question of undoing the Phillips screw in the middle (Phillips screw "A" in [url="http://www.hipshotproducts.com/files/all/faq4410a0bcb239e.pdf"]this PDF[/url]). Everything just falls off the base plate then, and you should be able to unscrew it no trouble. Quote Link to comment Share on other sites More sharing options...
oldslapper Posted October 23, 2010 Author Share Posted October 23, 2010 Thanks fellas! What a numpty, it's so obvious now I've removed it. Ok, so now to get a replacement. John Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.