danweb22

Selling my American Original Precision in Lake Placid Blue (discontinued colour) Starting to wear nicely now, especially on the back of the neck where the nitro is starting to lose the glossy shiny feel Few marks here and there as shown in the photos Not a bad weight for one of these (I’ve seen some around the 10lb mark!) Comes with G&G case and certificate Price includes U.K. postage Body Wood: Alder Body Finish: Gloss Lacquer Body Shape: Precision Bass® Neck Material: Maple Neck Finish: Gloss Nitrocellulose Lacquer Neck Shape: 1963 "C" Scale Length: 34" (86.36 cm) Fingerboard Material: Rosewood Fingerboard Radius: 9.5" (241 mm) Number of Frets: 20 Fret Size: Vintage Tall Nut Material: Bone Nut Width: 1.73" (44 mm) Position Inlays: Clay Dot Truss Rod: Vintage-Style Heel Adjust Truss Rod Nut: Vintage-Style Slotted Pickup: Pure Vintage '63 Split Single-Coil Precision Bass® Controls: Master Volume, Master Tone Bridge: 4-Saddle Vintage Style with Threaded Steel Saddles Hardware Finish: Nickel/Chrome Tuning Machines: Pure Vintage Reverse Open-gear Pickguard: 4-Ply Tortoiseshell Control Knobs: Knurled Flat-Top Neck Plate: 4-Bolt

Excellent preamp and great basschatter 👍🏻 GLWTS

Bought this from Geoff on here and looking to get back what I paid Price includes U.K. mainland postage Mid 80’s Matsomoku Japan. Few marks on original red finish as to be expected. Product number erased by previous owner/s. Passive Vol & Tone. 3 ply maple neck /RW. Adhesive side dots added (easily removed) Truss rod fine. Bridge saddles replaced with new Fender ones - originals included in sale. Original brass nut Original knobs. Strap button has alternative position hole in the back Must be old Dimarzios and you can’t beat those pickups in THAT position. Electrics untouched. Balanced volume throughout. New Rotos rounds 105-45 fitted. A very nice bass with a warm punchy sound at a fraction price of a Fender. Includes padded gig bag

Will consider bass trades (no cabs) plus cash too

Bills to pay so downsizing and having to move this on Like new, never gigged and home use only for about a month Collection only or meet up due to size/weight Specs; Woofers: 2-12” NXT Neodymium Magnet Woofers Tweeter: High Intelligibility Reference Series Tweeter Cabinet Design: Ported Cabinet Material: Lightweight Italian Poplar w/ Baltic birch baffle Cabinet Covering: Black Bronco Tolex Impedance: 4 ohms Power Handling: 800W RMS Crossover: Custom Phase-Coherent Crossover w/ Tweeter Control Frequency Response: 40hZ – 12KhZ Sensitivity: 104db @ 2.83v / 1-meter Dimensions: 31”H x 18-1/2”W x 15”D Weight: 49 Lbs.

Reduced to £999 Need to recoup some funds so sadly selling this Would cost around £1600 new for the amp, bag and footswitch together Never gigged, home use only Comes with carry bag, original box, manual and power cable Bluetooth Footswitch 1200w in to 4ohm! U.K. postage included

-

Selling my QSC K12.2 as no longer needed In excellent full working condition with power cable and tote bag Price includes U.K. mainland postage

Sorry sold about an hour ago 😢

Not needed anymore so off it goes! Excellent condition with all cables, screws and original box and manual Price includes U.K. postage Low-profile, 6-output Power Brick with Truetone 1 Spot "Switching Power" technology Handles up to 1600mA current output All outputs are fully isolated, to eliminated unwanted noise Two of the 9Vdc Outputs switchable to 12Vdc, two of them switchable to 18Vdc Profile low enough to mount underneath smaller, flat pedalboards (such as the Pedaltrain Mini)

Sold

Selling this as no longer needed Excellent condition with original box Has Velcro on the bottom Price includes U.K. postage

Selling this as no longer needed JFET Preamp pedal based on the Ampeg SVT Purchased directly from Broughton Excellent condition, no Velcro, original box Price includes U.K. postage

Selling this as no longer have a use for it Rare and sought after pedal, LPF and HPF filters, headphone amp and DI all in one box! Excellent condition, no Velcro, original box Price includes U.K. postage

Moving this on as I have just acquired a Nash P Bass Excellent (road worn) condition! I have the black pickguard fitted but also comes with the vintage white one Weight is 3.7kgs or 8lb 2oz Currently strung with D’Addario rounds (will include a brand new spare set too) and also the original Fender flats Gator gig bag also included Price includes U.K. postage Body Material - Alder Body Finish - Road Worn® Nitrocellulose Lacquer Neck Material - Maple Neck Finish - Road Worn® Nitrocellulose Lacquer Neck Shape - "C" Shape Scale Length - 30" (762 mm) Fingerboard Material - Rosewood Fingerboard Radius - 9.5" (241 mm) Number of Frets - 19 Fret Size - Medium Jumbo Nut Material - Synthetic Bone Nut Width - 1.625" (41.3 mm) Pickup - Custom Seymour Duncan® Split Single-Coil Mustang Bass® Bridge - 4-Saddle Mustang® Bass Strings-Through-Body

This is hanging around longer than I expected! Great pedal

And sold