I will have to drill 4 new holes to get the hipshot on the used black plate. I bought the used traben bridge as a practice experimental project to save my original chrome.
Did a bit of measuring and will need to sand down the bottom of the hipshot a little, no problem I got some 90 grit sandpaper and will lay it on a 2x4 and run the hipshot up and down it until it's so hot I can't hold it. This is because the hipshot is made to go on wood, not a traben bridge plate, so the thickness of the traben bridge plate must be removed from the hipshot bottom. While it cools remeasure, sand again if necessary. The used black plate needs repainting, no big deal, 400 grit sandpaper, auto primer, black gloss car wheel paint. Will also repaint hipshot so the blacks are identical match. Will also dissemble grover tuning machine heads, sand with 400, prime, wheel paint. I'm going to paint the guitar with car paint, gloss black. Sand with 400, prime, sand again, prime. Lightly sand trash spots, paint. and paint. and probably paint again. Wet sand with 2000, rub with buffing compound. I do not recommend trying this if you have never done it. I would hate someone to mess up their stuff because they read this post and then be mad at me. I know it's the traben thread but if you all want to see some car work I'll post it. 😁