Lee-Man

[quote name='walbassist' post='142751' date='Feb 18 2008, 09:14 PM']I have been surfing the internet too long. I can tell the fretted bass came from Electromusic and the fretless from BassNW just from the pics!

I'll get me coat...

PS Nice basses.[/quote]

You sado.......but I'm the same! It's a sickness

Neck £15 and still avalible

[quote name='BassBod' post='142316' date='Feb 18 2008, 10:15 AM']Seriously nice stuff - you don't see the blue/tort combination very often. You need a nice pricey cable mate....don't want to miss anything

BB[/quote]

SMOOVE sales there BB!

still avalible guy's.

[quote name='dave_bass5' post='142531' date='Feb 18 2008, 04:10 PM']Id be quite interested in the Levys one. The pair if i have to.
Do you have a pic of the back of it?

Im looking for something thinnish and one that doest sit too high up. I have a very basic Levys one thats perfect but im after another.
Its not the same as yours but i think your would be fine. just want to check how high the straps go.

I assume they will take a P bass?

Cheers.[/quote]

Sorry mate these are now sold.

Lee

[quote name='dmz' post='142260' date='Feb 18 2008, 01:49 AM']Two beauties !

A few questions - are those Nordies on the fretted bass - if so - what do they sound like and can you readily switch between humbucking and single coil on both pickups?

Finally, who did your epoxy job on the fretless ?

Cheers

Bill[/quote]

The pickups are actually Aero's (as fitted to Foderas) and it's an Aguilar 3 band pre. Sounds wicked.

The epoxy on the fretless was done by Sadowsky as an option.

Lee

[quote name='silverfoxnik' post='142188' date='Feb 17 2008, 10:26 PM']Great looking basses and with the amplification, that's some serious bass gear in the pictures!!! Are you the proud owner of it all?[/quote]

Not my gear in the pics. My current rigs are:

Aguilar DB680
Aguilar DB728
Aguilar AG500
2x Aguilar GS410

Soon to be augmented with a DB750 as well.

Lee

[quote name='jono b' post='142133' date='Feb 17 2008, 09:11 PM']I might take that neck, if you can give me sizes for the heel including spacing between screw holes. It has to fit on a Squier Std Strat body. Do you have the neckplate/screws/missing bit of the locking nut?
Cheers[/quote]

The heal is 5.7 cm wide and 7.7cm long. Distance between the screws (from centre of screw) is 5cm and 3.6 cm ish. The back plate and screws are provided. No locking nut though, but I do have a full floyd rose going cheap and just checked that it [u]will[/u] fit. See my other thread for some other guitar goodies. Here's a pic of the diecast back plate.

[quote name='krazy_olie' post='141931' date='Feb 17 2008, 03:22 PM']Thanks, I think I'll give that a shot...
Just to clarify, I take 2-3 cocktail sticks, secure them in the hole with wood/pva glue, wait to dry, then screw?

O[/quote]

+1 for this, works a treat

[quote name='wayne58' post='142015' date='Feb 17 2008, 06:17 PM']Excellent taste if I may say so. Has the fretless been fitted with a VTC?[/quote]

Yep has a VTC, which is great

Just found another feedback thread for Me, so have copied the information below with a link to the other one. I want you all to know how lovely and great I am

From Mego0810 "Just bought a Fender Victor Bailey from Lee. Great deal went very smoothly. Very good with directions when I was lost!! Good cup of tea.

Really nice guy and great to deal with.

Mego "

Hope this was ok. Any other feedback glady excepted!

I've heard this before a few times about this venue.

Here's my main two gigging/recording basses. The blue one is a fretless with epoxy board







Lee

One levys in good condition and it's well padded. The other is by Wings (JHS) and no where near as good, does the job though [b]£15 + p&p for the PAIR[/b]

Guitar neck and back plate+ screws from a mid 80's Charvel. The neck has a crack in the head stock, but stability is still great and does not seem to be effecting it. [b]£15 + p&p[/b]






Washburn VGA 7 battery powered amp, works great with bass and guitar. Measures 9 inches high and 10 wide. NOT the same as those Marshall ones. I bought it for busking years ago and you can run it off a mains adaptor.[b] £20 + p&p[/b]




Rock 'n Roll strap made by the person that makes Madonnas bra's. [b]SOLD[/b]




Cheers
Lee

Right guy's been doin a clear out and found these bit's. Sorry bout all the guitar bits and I know it's basschat, just thought some one might find them usefull.

The guitar bits are from an old project I put together years ago and stripped down a few years back for anoth that I never got round to. I will do a deal on the all the guitar bit's together.

First up is a geniune USA made Jackson Floyd Rose and locking nut ect (all the bits you need to fit e.g. screws and block, no whammy bar tho) from a very early 80's superstrat (Charvel or Jackson soloist?). I'm after [b]SOLD[/b]



Set of 6 in line machineheads with screws to fit that were taken from the same guitar [b]SOLD[/b]



Pickups from a different USA Jackson that were removed for upgrade to active EMG's. Also will include the wiring [b]SOLD[/b]




2 black guitar knobs, the thing from a selector switch and an output jack plate [b]£3 + p&p[/b]



Plastic bits from the back of a Charvel[b] £3 + p&p[/b]


Cheers
Lee

[quote name='BassBod' post='141828' date='Feb 17 2008, 11:11 AM']Following on from the recent cable thread (yes, I know) I'm offerring up my little used MIT Ripcord cable - the one with plastic boxes at either end. Its had very little use, I guess its about 8 years old and around 20 ft long. So if you've ever fancied trying a "high end" cable without paying a fortune, its yours for £20 posted (UK).

I've also got a set of LaBella flats, set 760FL (43, 60, 82,104). They've been on a Jazz bass for around three days so they're not really broken in, although technically they have been used. I'm just a jessie who prefers the flimsy feel of Thomastik flats. These are the same type as the Jamerson set, but lighter guages, which should make them a bit kinder to your bass neck? Yours for £15 posted.

cheers - usual PM for questions, (but please, no more in depth discussions about cables! ) I'll do some photos if anyone's interested etc

BB[/quote]

I'll take the MIT rip cord, please PM me your paypal and I'll send you the money

no worries mate, let me know what you come up with

[quote name='dub_junkie' post='141370' date='Feb 15 2008, 09:10 PM']electric? acoustic? any particular brands or types?

cheers[/quote]

Either, it's for a recording project.

Tempt me wiv what ya got. No firewood though

Go on make me a sensible offer before I ebay it.

No one interested?? I might do a deal on a guitar :blush:

Hi Guy's,

During my early spring clean I found a boxed Spirit (soundcraft) microphone. I'm after £20 + the postage.



Here's some bumpf from soundcrafts web site.

[url="http://www.soundcraft.com/download.asp?filename=pdf/brochures/dynamic_mics/dynamic_mic_brochure.pdf"]http://www.soundcraft.com/download.asp?fil...ic_brochure.pdf[/url]

Lee

I have a very strong shipping box (made it all the way from USA with my sadowsky in it) that this can be shipped in.

I have good prev feedbacks.

[quote name='Machines' post='138024' date='Feb 11 2008, 10:41 AM']I don't think they're particularly different to a normal Fender machine head bar the MusicMan logo..[/quote]

The peg is slightly shorter and over all abit heavier/solid feeling.

PM's returned

Just found a single chrome machinehead from a '92 Stingray while having a clear out. This is in full working order and only removed to fit a D-tuner to the bass. The bass was stolen last year and I have no use for this machine head.

No idea what it's worth, I expect MM would want a small fortune for a new one. Pics avalible.

Make me an offer.

Lee