Misowaki

Interested in trades for a rosewood board Fender neck (P or Jazz) with block inlays or sunburst P bass body. Or a Source Audio C4. Maybe something else I haven't thought of. Try me!

1 hour ago, Bassmonkey said:

Can you respond to your messages please mate? 

I'd also messaged him a while back and I got responses initially but then went dark.
Hope he's okay...

Some answers to questions I've had that might be of interest:

String spacing is 18mm, Gotoh 404SJ-5 bridge, steel saddles.

No case, collection or meet up preferred. Could even deliver if close enough and paid up front. If not possible, I'm happy to remove the neck and package for shipping (sorted by buyer).

 

FWIW, if wrapping you want to leave about a half cm or less from the bearing edge to allow the head to sit. Use some contact adhesive and a couple of clamps and you're good to go.

If you want a cheaper option, that fake sticky back veneer type stuff you can buy on a roll at Wilkos would also work.

Do you have any of the Thomastiks left?

Seymour Duncan Quarter Pounders - £80 ONO inc. postage
Still attached to the Squier pots if you want them
*sold* 

 

Bridge pup, Fender Standard - £35 £30 £25 inc. postage
AFAIK is the same pup in both USA and MIM Standard. A quick search tells me it was used in the Road Worn, Classic 60's and earlier Hwy 1 series. Bobbin says 048613. 

PMd re Hercules boys

I thought there would be more love for this guy. Any offers?

5 minutes ago, zonular said:

I don't want to lead you on mate, got landed with an unexpected bill so I'm afraid I'm bowing out. Glws though

no probs, cheers!

SOLD - pending payment

I hear it calling your name... 😁

2 minutes ago, zonular said:

Might have to check the bank ACC after posting but would you ship the bass to Dublin?

I'm not opposed to shipping it but I'd leave that to you to arrange.  I'm happy to remove the neck, pack it securely and give the relevant details to make it easier.

ONO 

This was my main boy for a spell but it's always been a chop 'n' changer hence it being in parts.  Ideally I'll sell this in two parts but I can sell the neck and tuners separately if you prefer.  

Fully loaded body - £175
We have a Daphne blue Alder body bought from BC maybe 2 or 3 years ago.  Set up for through body stringing if you have a bridge that facilitates it.  Comes with basic bridge and strap pins.  It's not a tight neck pocket, maybe 1 or 2 mm extra space.  Depending on your neck/ howyou like your set up, you may want to shim it.  A little notch has been made to allow for truss adjustments to a USA neck I had on there once.  Not visible with a regular pickguard, of course.
It is loaded with an old Dimarzio Model P, wired for parallel/series with a push/pull pot.  Not sure what that pot is but maybe a Dimarzio, it came wired with the pup.  The tone pot is CTS with an Orange Drop capacitor.  Swithcraft jack socket.  Can also supply the red guard pictured.  Oh, and it has the ashtray.

Neck and tuners - £200
2018 MIM Maple neck with Gotoh Tuners (unattached as two of the holes are wider than the pre-made holes so rather than attach them I've left them off should anyone want one without the other.  Happy to attach them for you.  String tree is included.  In the pic you'll see a previous failed attempt at attaching one with a brass screw which died so I made a new hole and the bodged hole isn't visible when strung.)

Interested in trades for a rosewood board Fender neck (P or Jazz) with block inlays or sunburst P bass body. Or a Source Audio C4. Maybe something else I haven't thought of. Try me! 

"Roadworn" BB425X. I was going to strip the paint and stain it or something but I liked the matte/almost wood grain look after I'd started to sand it and left it as is 😁  
So yeah... less road worn, more hand worn with some light sand paper and scarcely gigged but still a beauty and I swear the action and playability is like that of my old Sandberg, just a different feel to the neck wood.

I upgraded the bridge to a Gotoh but will provide the original ugly thing with the extended lip for the B (makes no difference if you're stringing through anyway).

Just not using a 5er anymore so thought I'd put it up and see if any interest.

PMd

What a beauty! 😍

8 minutes ago, discreet said:

Thanks for being cool. Good luck.

Why would you wait for a whim when you have a guaranteed sale?  All good, man! 😁

1 minute ago, discreet said:

Agh! I'm really sorry but I think logically it's first come first served. The other guy sent the first PM.

If Stuart needed to go for a wizz, it's cost him. 

Fair

@discreet It's your shout, man.  Stuart has gone dark so whatever works for you

@discreet I am but don't know about @StuartB ...
 

Works for me!  PM me @StuartB?

11 minutes ago, StuartB said:

I might be up for the neck if that helps...  Split the cost?

Well, that would work for me but down the OP I guess.  I could pick the whole thing up as I'm not too far (I don't think).

Hey man, would you consider selling just the body?  Got a neck looking for a home 😁

On 24/11/2019 at 16:12, stinson said:

Hi. Sorry, didn’t see your response! Yes, still available.

I'm all sorted now but thanks

3 hours ago, Studio GC said:

Sorry! Just got a new computer and missed this....That's right. Local deal wasn't it? I'd be happy to sell just the body and pick guard. If you have a neck, come on by and we can see if it fits ok. PM me with your details and we can chat. Thanks! Gunnar

Will PM you 😃