zvirus

Hi.

As described. You can set desired voltage by turning screw and read voltage on meter and watch when led goes on....or off

Cheers!

Still for sale... so far..

Hi,

Needs some work. Hair too short in length = never get loose.

Still does the job (you can make sound) but needs new Hair(!)

Free UK delivery included in price

Paypal Gift of Bank Transfer pls.

Feedback:

Usual.. sold elsewhere...

Sold elsewhere 

Sorted...

All sold... on Evilbay

Got a Fender Jazz Bass from Justin. True GENTLEMAN in every way! NICE and EASY transaction! Great communication!

Cheers!

Tomas

SOLD 🤣

Pm`d

Hi,

First Jack`s transaction here. He bought my Squier Bass. All went so smooth and he is true gentleman! Definitely recommend him!

Tomas

...

Hand made to Fender specification... as used in 60s basses also in my bass. Set of 2 - neck and bridge

If you BELIEVE you need to shield 100% of your cavities to get shielding this product is NOT for You. It work Ok in my bass(!) and I guess worked ok in thousands of Fender`s Basses...

Will fit Fender/Squier jazz Bass...

UK postage included in price... Paypal Gift or Bank Transfer otherwise add extra £0.60 fees...

Custom made Ground strap for Your project.... impossible to get in UK. Mine are half price of genuine Fenders and does SAME JOB.   AND look same (no "F" logo on it)

https://reverb.com/uk/item/4252149-genuine-fender-jazz-bass-bridge-grounding-strap-for-vintage-models-0019658000

Price includes Free UK postage 1st class...

UK only.

Thx

Mine:

Fender`s:

feedback:

Probability that The LED is gone/broken  is lets say - 1%. But it`s worth to have a look inside...

Hi,

Creativity! That`s the answer!

Buy Two of these:

A small casing - lets say like this:

And my Battery indicator:

This is what I`ll do IF need voltage drop indicator for a battery pack...

Cheers!

20 hours ago, stewblack said:

Hi, excuse me for being dense. But where is the light when it's all assembled? 

Do you have a picture of the bass with this attached? 

Thanks 

Well.... Im afraid you have to use Imagination and drill 3mm hole in a plastic/wooden cover you might have in your bass/guitar  and use glue or buy this:

Personally I`d use tiny bit of super glue to hold it in that drilled hole...

I have installed this in my stagg but used The led factory mounted so - no difference in front panel... = nothing to show..

looks like this:

When battery goes down the led changes colour  and I know it`s time... to change...

Norn Iron - sometimes known as Northern Ireland... 😁

 Hi

 >> APOLOGIES - Im not doing it any more <<

!!! Are You  familiar with basic electronics and soldering and understand this device needs to be switched off when NOT IN USE?? !!!

No need to be installed on a bass.. You can remove battery and test it outside the bass... if its still ok the led will not lit up(!)

 Worrying about dead battery in the middle of a tune on a gig?  - You do not have to any more with this circuit!

It works with 9V battery (or 2 of them) and It can be set up via trimmer resistor to indicate any voltage between 3V and 36V

You can choose the voltage which will lit the led.  

EMG, Bartolini, Seymour Duncan and others use 9 volt batteries and its recommended to set it to 7.7V

My Stagg EUB still works ok when 4V and above (4-9V range)

• Blue Led 3mm diameter
• Indicating range 3.0-36V - Can be set using small flat screwdriver and you will need adjustable DC Power supply - I can set it to any Voltage from 3V to 18V (in example 7.7V) DO NOT WORRY  - I`ll DO THIS FOR YOU!
• Current Draw(power consumption) approx 0.01A(10mA) @9V - when led is not lit - please note: THIS IS THE LOWEST DRAW I COULD ACHIEVE FROM BASIC ELECTRONIC PARTS. ANYTHING BASED ON DIODES WILL DRAW MUCH MUCH MORE(!!!) I did my lesson.
• As EVERY electronic device it will drain your battery if not switched off after you finished using bass or guitar

When the voltage drops lets say below 6.5V(in this example) the led will lit up as shown in my video:

£15 + £2.69 Signed/tracked Postage 1st Class UK  Posted same day if paid by 3pm

For an extra £2 I can attach/solder MICRO switch - the one you can see on some active bass guitars

How to install? You will know if you have the skill...

Marco sold me Stagg EUB stand. Excellent packing and service! Gentleman...

Cheers

Tomas

On 16/03/2020 at 17:09, JazzBassFace said:

Now, this guy is trying to get custom orders! Any takers?

He has "IMPROVED a LOT" - wonder how were they made before the "improvement"??? 😁

£299 for fire wood???I 🙈

And he has more fire wood:
https://www.ebay.co.uk/itm/TRADES-WELCOME-Retrovibe-vantage-hellandbacker-active-4-string-electric/383378530771

Hi,

Got a case from Richard. All went smooth and Hermes delivered it for reasonable fees.

Thx!

Sold locally..

TRADE ONLY - SORRY...

They have served me well on my bitsa Fretless:

https://www.bareknucklepickups.co.uk/pickup/j-bass/j-bass-60-hf

Stock photo:

Neck - 7.7k ohms

Bridge: 8.0k ohms

But I think I might need something different with MORE mid range  BUT single coils(!)

What do You have????

Cheers!