sirmuppet

Awesome. Cheers for your help guys 😁

I think it’s a 2006. Has 06 at the start of the serial. That makes it a 2006 I think doesn’t it?

Hi all. Have a Lakland bass and I'm not sure of the model. Can any one help or tell me how to find out what model this is? Thanks.

You're right it is flat. Is flat under but under a clear plexi. After much searching I did manage to find one of these on Aliexpress. It's a very good copy but there is an issue with the neck pickup.

Pickup route looked off to me. That said the channel is messy but lines up with what @kodiakblair posted but the pickup pocket doesn't look quite the same. The truss rod route looks fine but not as wide as it only has a single truss rod. The 4001C64S doesn't have a skunk stripe, so at least that looks correct.

I did wonder that but haven't ever opened one up. I twice had Fenders that used mini pots when they generally use full size ones.

Ok, so that may not be a tell tail then, lol. Cheers for sending them.

Hi all. Am pretty certain this is a fake but just looking for confirmation. Wasn't given a model but I believe it's meant to be a 4001c64s based on the Paul McCartney bass. Has everything it should like Ric branded tuners, case and case candy. Truss rod cover looks genuine as does the bridge. The later I'm not 100% on the saddles. Has the satin finish that it should, reverse headstock and truss cover. Even has the zreo fret. Taking the pickguard off though and things start to look fake. The routing for the neck pickup to the control cavity looks bad. The final warning light is the trus rod, yup just one. I've owned a couple of Rics and this feels very good and if I hadn't have taken the pickguard ond cover off I'd have believed it to be genuine. Am just checking that I'm 100% correct that it's a fake before I go back, just in case they put a single truss rod in the model, I don't think they did but I have heard Rickenbacker are now using single truss rods. It's a niche model I'd think to fake and I can't find any of these fakes online. Any help would be great for going back to the seller. Thanks.

Certainly an odd looking back. I've seen that happen on Nitro but never Poly. What could cause that?

Ah, that's not so good. I had the same issue with the BK7 when I tried it. Loved the videos but when I played it with a band it just sunk the bass into the back. Videos sounded lovely. Can I ask, did you replace it with anything else and if so what did you pick? Just curious.

I have a question about the Infinity. I saw a review that stated the compressor only compressed the low end and not the high end. I know as standard on the DG Microtubes Ultra it only compresses the low end but if you hold down the bypass switch you can engage it to full band compression. Does the Inifinity have options to allow full band or low band, or are there no options?

Sold me a sansamp and was a pleasure to deal with. No issues and would 100% buy from again if the chance arose.

Brilliant. Once I know which pedals I'm keeping and how big the board will be I'll know which I need to order. Thanks for the help everyone.

Exactly that. This may sound stupid but it says DC, can that still be used on an AC adaptor?

No worries. Figured I'd post the fix in case anyone else ever has that issue and sees this thread. It must be an optical illusion as it is/was sitting in the groove. I always check that it's in the correct one to sit between the poles on the pickup.

I did think about that or the Gator G Bus-8 but my tuner has a power out for a daisy chain. So figured I'd try that first.

I was more thinking rather tahn extend each one I need to is to run one of these down to the bottom row and just buy as many as I need to fit to the bottom row of pedals. That should work as it would the same I guess as one pedal being a higher draw off the original chain but just supplying more rather than one draw. If that makes sense, lol.

Yeah sorta like that. I was looking for just an extender. I guess if you don't go over the Ma's then it shouldn't be an issue should it?

Ok so thought I'd update this. I took the bass apart and put it back together again. Same issue. What I then tried was swapping the bass saddles around and that seems to have sorted it. There was nothing there that was obviously an issue but guessing something was out of whack. Still not a massived low end sounding bass but it doesn't sound bad now. Cheers again for all the tips.

Hi guys. Am putting together a pedalboard at the moment. I have a daisy chain power supply from my boss pedal. Some of the ends don't reach the desired pedal and wondered if extensions exist. I don't need massive lengths just a couple of pedals length really. Do these exist and if so where do you get them? I've been looking but I'm not coming up ith much. Best I could find were some CCTV ones on Amazon which I didn't know if they were right or not. Oh and it's just the standard Boss size 9v ones. Thanks for any help.

Just had a thought, I have tried the same bass. I had the same model 3 months prior and there were no issues like this with it.

I haven't got the same model but it's basically a precision and I have 2 of those which are perfect. Even my Jazz had a basier sounding E string. I had my hearing checked a couple of months ago. While I have a little loss it's still less than expected atmy age even if I do have tinnitus 😆

Ok, so what I tried didn't solve the issue when put through an amp. The nut needs fixed in my opinion but it's likely that won't solve an issues when fretted. Am I missing trying anything else? Next option is to swap the saddle around just in case there's something there. Is it worth trying a Taperwound string since it's a USA string through body?

Good eye. I hadn't even spotted that. My OCD says thet'll be getting replaced regardless, lol. I got this direct from the Fender factory brand new so by this point I don't really have any comeback but I'm whizzed as that's Fenders QC down again. Again awesome spot on that!