Jump to content
Why become a member? ×

Jabba_the_gut

⭐Supporting Member⭐
 View Profile  See their activity

  • Posts

    1,646

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Posts posted by Jabba_the_gut

    Bass Guitar Magazine

    in General Discussion

    Posted

    My copy of Bass Guitar Magazine arrived in the post today and I was wondering if anything would be mentioned regarding last month's edition. Last months magazine had a number of errors in with the main one being a missing review of a Mike Lull bass that was replaced by a duplicate review of a Fender acoustic bass.

    I suppose I was kind of expecting some form of 'Whoops! Bit of an error....here's the review this month as well as the usual stuff' but ther isn't. There's an apology for an error to do with details on an Aphex pedal (which I hadn't noticed!) but no mention of the Mike Lull review.

    I'll drop them a mail to see if they will be publishing the review at some point. Was anyone else half expecting the review to turn up this month?

    Scratch built bass #2

    in Build Diaries

    Posted · Edited by Jabba_the_gut

    Spraying not gone so well - oops!!

    Not sure what went wrong, could have a number of things:[list]
    [*]bit over eager and tried doing this when it was too cold
    [*]hadn't cleaned all of the dust from the surrounding area down enough
    [*]slightly clogged airbrush
    [/list]
    What ever it was, I ended up with a bit of a rough finish that I a going to have to take back down and try again. I'm going to have a look at cheapish, fine spray gun and try that on a few samples fiirst to see if I get a better finish before I try this again.

    Think I'll also wait for it to properly warm up before I try this again, in the mean time I've started preparing some wood and started trying to source some parts for the next project.

    Finishing a Wenge Fretboard

    in Build Diaries

    Posted

    Hi Steve,

    Nope - this one is using a slab of [url="http://basschat.co.uk/topic/176477-scratch-built-bass-2/page__hl__scratch%20built"]swamp ash[/url] . I'm saving the elm for another project as it has a really nice grain. When I do start that I'll drop you details so you can see how it progresses.

    Cheers again

    Jez

    Bass Guitar Magazine editor

    in General Discussion

    Posted

    It's an interesting thread this regarding the quality we expect from a magazine but also the content of it. Might be worth Joe asking for opinion on here as to what folk would like to see as I guess we will all have different ideas.

    I've suggested in the past that review of more affordable basses should be included as other folk have stated, we don't all have 3 grand for a bass.

    I quite liked the 'Woodshed' articles because I'm interested in building basses as well as playing them. Thought there was some good stuff in the past with Zon and the likes. I see they have an article running at the moment about restoring a Ricky 4001. It's interesting enough but some costs against the work would make it more useful to anyone thinking of doing something similar.

    As far as interviews go, I do find the ones in 'Bassically Speaking' a little tedious at times as there so often seems to be the 'a bass only needs four strings' and 'I do/don't like slap because' as standard responses.

    So what else would anyone like to see? Maybe articles on how to record basses, recording kit - though that is probably starting to creep into an area covered by other mags, decent links to sound files for the tutorials, sound files for the basses reviewed, history of bass companies, I think there's all sorts of stuff.

    I still quite like it despite its flaws but I don't think it takes as long to read as it used to!!

    Router Bits?

    in Repairs and Technical

    Posted · Edited by Jabba_the_gut

    [quote name='Dolando' timestamp='1357475487' post='1923041']
    Thanks so much for all the info guys. Much appreciated. I have literally no idea where to start, so will give that PDF a read to build up a a bit of knowledge before I start on some wood. And I will definitely be doing plenty of practice pieces. I won't be starting anything just yet, as I'm moving house soon, just doing a bit of digging.

    This may be a silly question, but what do you make the templates out of? Surely if its wood, there is risk of cutting the template and ended up with the wrong shape, or is it just the case of being careful not to?

    Thanks,
    [/quote]

    You get router bits often referred to as template cutters. These are straight bits with a bearing about 1/4" tall on the shaft that is the same diameter as the cutter. You can make a template out of something about 1/4" thick such as some decent ply or mdf. When you run the cutter round your work piece with the bearing running round the template you get a perfect replica - the cutter can't cut too far into the wood as it is prevented by the bearing.

    Here's a typical template cutter randomly picked from [url="http://www.ebay.co.uk/itm/Trend-C121-X-1-4-Tungsten-Carbide-Template-Profile-1-4in-C121X1-4TC-Brand-New-/370664678145?pt=UK_Home_Garden_PowerTools_SM&hash=item564d562301"]eBay [/url]

    Cheers

    Jez

    Router Bits?

    in Repairs and Technical

    Posted

    Quite agree with what Ben has said - just take small cuts, be patient and it easy at the end grain. I had a go on a test piece, got a bit eager and took a chunk out of the end grain. Would have been a pain to fix if it was the proper piece of wood but I learnt!!

    I'm just completing the second bass I've made from [url="http://basschat.co.uk/topic/176477-scratch-built-bass-2/"]scratch[/url] and I have a Black and Decker router with a 1/4" shank. It's not the best bit of kit but it has done the job so the router you have should be fine. The router bits I have used are made by Trend mainly and seem to cope with the work well.

    I'd also make sure you make decent templates for routing - time spent here will give you a better, more accurate result in the end and if you are pleased and decide to make another then you already have a template to cut to. Making a decent template for a neck pocket is in my opinion the way to go as you can practice a cut on a test piece of wood and adjust the template until it give you a nice, tidy pocket. Always go by the old saying 'measure twice, cut once'......

    Definitely have a go - it's a nice feeling to say you made it yourself!

    Cheers

    Jez

    Scratch built bass #2

    in Build Diaries

    Posted

    [quote name='kevin_lindsay' timestamp='1357258365' post='1920146']
    Take your time mate. Light goats and light flatting back between coats is the way to go
    [/quote]

    Cheers for the details. I'll try it that way and see how I get on. I'll post details as to how I get on with the water based laquer in case it is of interest to anyone else.

    Jez

    Scratch built bass #2

    in Build Diaries

    Posted

    Hooray! It's finally warm and dry enough to get back to the garage and start spraying this thing.

    I'm having a go with some water based sanding sealer and laquer with a satin finish. I'm applying it using a cheap (£10) airbrush. Seems to go on okay but can see this needing a fair few coats and plenty of sanding to get a nice finish.

×
×
  • Create New...