Jump to content
Why become a member? ×

Loose pots


Recommended Posts

well, i have an this bass [url="http://www.alrica.pt/loja/images/%5COLP%5CMM2.JPG"]http://www.alrica.pt/loja/images/%5COLP%5CMM2.JPG[/url]

as you can see it has those metal pots, and the 2 volumes have came very loose, i dont think they could be anymore loose,. Too much tryin to imitate a cello. :)

anyway,how can i fix this? I've took it apart and had a root around but it seems a bit complex.

any ideas?

thanks

Link to comment
Share on other sites

The knobs should be either a push fit on the pot shaft or held with a grub screw. Take the knobs off which should reveal the pots are secured to the control plate by some thin nuts. Tighten those nuts up and you should be good.

Hamster

Link to comment
Share on other sites

If there's definitle no screw holding them on then they could just be very tight.

Protect the body with some thick card (maybe make a bit of card with a hole cut out and pout this over the pot). Then get two flat bladed screwdrivers and place them opposite each other under the knob. Now gently and evenly lever off the knob by twisting the screwdrivers, always making sure the body is protected by the card.

Once the knobs are off you should see a nut the holds the pot against the body. Tighten this up to stop the pots from moving around then put the knobs back on.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...