MXR DC Brick, a potential resolution?

[Grezza 1]

Hi I’m fairly new to pedals and boards and currently daisy chain my zoom b3 but since Santa brought me a source audio aftershock pedal I’ve been having trouble linking the two and have heard that the zoom doesn’t play nicely with others on the chain. So I’m wondering if an MXR DC Brick I’ve seen for sale would solve the issue of running them together on an isolated circuit? 
I would welcome anyone else’s thoughts 👍

thanks 

Graham 

[jrixn1]

.

Edited June 25 by jrixn1

[Grezza 1]

Hi thanks for your message,

The aftershock needs 300mA and the Zoom looks like it needs 500mA

 

The other thing I wasn’t sure of was the polarity of the Aftershock being compatible with the brick.
The brick is centre negative whereas the Aftershock looks like it's tip negative I don't know if they are compatible and it's just different terminology for the same thing, or if it would cause a problem. 
thanks Graham 

[jrixn1]

.

Edited June 25 by jrixn1

[Grezza 1]

Brilliant 👍thanks for your help 

Graham

[Quatschmacher]

9 hours ago, Grezza 1 said:

Hi thanks for your message,

The aftershock needs 300mA and the Zoom looks like it needs 500mA

 

The other thing I wasn’t sure of was the polarity of the Aftershock being compatible with the brick.
The brick is centre negative whereas the Aftershock looks like it's tip negative I don't know if they are compatible and it's just different terminology for the same thing, or if it would cause a problem. 
thanks Graham 

Aftershock only needs 150mA.

Edited January 20 by Quatschmacher