EBS_freak Posted June 1, 2009 Share Posted June 1, 2009 That Yamaha digital amp - I think - based on the fact the speaker cabs they did for it were 4 ohm... Quote Link to comment Share on other sites More sharing options...
grimbeaver Posted June 2, 2009 Share Posted June 2, 2009 I run a Eden WT550 and always run it at 2ohm, never had a problem, its small and light, fits in a little shoulder bag, gives 750w of power, tone to die for and a good semi parametric EQ, cant go wrong with it. Quote Link to comment Share on other sites More sharing options...
hummel Posted June 3, 2009 Share Posted June 3, 2009 The Yamaha BBT550H digital head delivers 500W at 2ohm. Weight is only 4,5 kg (10lbs), thanks to the class D module. Rather complicated amp to operate, but very versatile and reliable. The 5 presets are very handy for quick changes (i.e. fretted/fretless/distortion). The best thing about them...they are cheap! bought one last year brandnew for only 250 euro (GBP200). You can't go wrong there! Quote Link to comment Share on other sites More sharing options...
rslaing Posted June 3, 2009 Share Posted June 3, 2009 (edited) [url="http://www.acousticimg.com/products/prod_clarus_specs.html"]Acoustic image Clarus [/url] ? Over 800 watts at 2 ohms apparently. Weighs 4 lbs. Depends on the sort of sound you want (it is very CLEAN) - and you could always add something if the built in EQ and your bass don't give you what you want. I've got one, and it sounds great with an active bass. I think WoT used a similar model with an EBS pre-amp for a while. [i]"Clarus+: 800W (plus) with two channels...plus effects * Extended frequency range, high fidelity sound * Light weight (<5 lbs.), small size (10.2 x 8.2 x 3.5) * Unique, slanted front chassis with built-in handles on side rails (Clarus 1) or capable of being mounted in our Coda+ or Corus+ speaker cabinets (Clarus+) * Combo jack input (either 1/4" or XLR) * Phantom power on XLR input * Three-band EQ preamp section per channel * Input and master level controls * Effects loop with return level control per channel * Switchable notch/low cut filter per channel * Balanced direct out with ground lift * Digital effects with 6 presets and level control (Clarus+) * Mute switch and pre/post EQ for direct out * Stereo capable with external power amp (Clarus+) * Headphone output (Clarus+) * 400 W switch mode power amplifier (Clarus 1) or 800W (Clarus+) * Switchable dual voltage operation (115/230V) * Dual speaker outputs via Speakon connectors * Comes with padded case, Speakon to 1/4 inch adapator"[/i] Edited June 3, 2009 by rslaing Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.