Owen Posted March 26 Share Posted March 26 My L1000 has had some work done. I suspect the pickup needs a rewind. But could someone confirm the control plate wiring is as it should be? TIA Quote Link to comment Share on other sites More sharing options...
Cosmicrain Posted March 28 Share Posted March 28 From the picture/s it does look the same, as in, all the caps look in the correct place as does the 6K6 resistor on the 250K pot, and I would also say, the wiring looks the same. However, I can only see the value of the middle pot (250K) which also checks out, as it is correct. Therefore, I would suggest the diagram is of the circuit you have in the bass. Quote Link to comment Share on other sites More sharing options...
Owen Posted March 28 Author Share Posted March 28 Thanks. They are the orginal pots and I have no reason to believe that the wiring has been put back wrongly. However, I have a recognised history of sorting out problems by changing something that had nothing to do with the problem. Then still having the problem and also a new part I did not need to spend money on. 1 Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.