jay42 Posted November 4, 2022 Share Posted November 4, 2022 Hi folks I have one of these awesome ShuttleMAX 12.2 amps which I absolutely love; I know this will be a long shot but does anyone have or know where I can get hold of a set of rack ears for it? I'd love to put this unit in a rack but I haven't a clue where to look for the ears! Many thanks Jay Quote Link to comment Share on other sites More sharing options...
Gareth Hughes Posted November 4, 2022 Share Posted November 4, 2022 Not official but if you know any builders/welders - my next door neighbour, a kitchen/bathroom fitter kinda guy, took measurements of the screwholes in the head, plus the rack case holes, and a few bits of bent aluminium and black spray paint later and all was good. Quote Link to comment Share on other sites More sharing options...
Downunderwonder Posted November 4, 2022 Share Posted November 4, 2022 If you go down that road make sure to get the correct screws. Too long is worse than wrong pitch because you can make contact with amp guts and go poof. Quote Link to comment Share on other sites More sharing options...
agedhorse Posted November 5, 2022 Share Posted November 5, 2022 I only have a couple of saddle mounting systems left for those amps. Yes, be VERY careful when "home brewing" any hardware for an amp, I have seen too long screws ruin an amp beyond economical repair (aside from being dangerous). Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.