BassAdder60 Posted July 1, 2022 Share Posted July 1, 2022 Interested in how other GK Legacy users set their input trim ? I can max mine out even with my active bass ( the GK video suggests max setting and back off if clip light comes on ) Does anyone also use the “ bump” setting or does it add too much bass when playing loud Finally drive settings how do you set yours ? Im looking to have mine as always on with the slightest amount of grit and same volume level etc Quote Link to comment Share on other sites More sharing options...
2elliot Posted July 11, 2022 Share Posted July 11, 2022 Received my 800 on Saturday and gigged it on Sunday without any previous rehearsal. Had an hour or so to faff about with it at home then 15 minutes to sound check with the band. Dimed the trim then backed off as required as it says in the video. Ended up looking like this.... Still needs a little bit of fine tuning but still sounded great and handled the effects with ease. It's not what I'd call a plug and play, it's very bright when everything is flat so needs a bit of work to find your sound Once I'd stuffed my distortion through it it sounded huge. Just need to find a case for it now. 1 Quote Link to comment Share on other sites More sharing options...
BassAdder60 Posted July 11, 2022 Share Posted July 11, 2022 (edited) Here’s my settings I don’t use bump but max the bass and back off the low mids a tad I gigged mine last week and bump added too much boom. Edited July 11, 2022 by BassAdder27 Quote Link to comment Share on other sites More sharing options...
2elliot Posted July 11, 2022 Share Posted July 11, 2022 (edited) Interesting, what cab and bass are you using? I'm going through a Barefaced Four10 with a Yamaha BBPH active bass using a plectrum. Edited July 11, 2022 by 2elliot Quote Link to comment Share on other sites More sharing options...
BassAdder60 Posted July 12, 2022 Share Posted July 12, 2022 8 hours ago, 2elliot said: Interesting, what cab and bass are you using? I'm going through a Barefaced Four10 with a Yamaha BBPH active bass using a plectrum. Cab is Ampeg SVT212AV and I play a Stingray bass Quote Link to comment Share on other sites More sharing options...
cetera Posted July 12, 2022 Share Posted July 12, 2022 I have my EQ at 2 o'clock bass, 2.30 lo-mid, noon hi-mid and 11.30 treble as the amp is very bright. Bump & Presence switches engaged. Input trim is around midday as my active Spector is very powerful. EQ on Spector dimed. I occasionally add just a tiny bit of grit from the drive section.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.