bobbajobb Posted January 25, 2022 Share Posted January 25, 2022 Hi! Upgrading my bass with aguilar pickups and preamp. Settled on this: https://www.muziker.co.uk/aguilar-obp-3sk-pp Reasoning for this one in particular is I only have 3 knobs on my bass However I've just found out it doesn't come with pots, and I have no clue where to start in terms of what pots I'd need. Sounds like I'll need 3, and one needs to be push/pull. What resistances should I get? Any recommended sites? Appreciate any advice, other things to take into account etc Quote Link to comment Share on other sites More sharing options...
bloke_zero Posted January 25, 2022 Share Posted January 25, 2022 On the aguilar site they say: Quote OBP-3SK: Includes stacked Treble/Bass pot, Mid pot, and black mini-toggle switch for Midrange frequency selection https://www.aguilaramp.com/pickup-series/obp-preamps/ So I think the OBP is just the PRE but you've got the OBP-3SK kit which includes the pots? Quote Link to comment Share on other sites More sharing options...
fleabag Posted January 25, 2022 Share Posted January 25, 2022 1 hour ago, bobbajobb said: Hi! Upgrading my bass with aguilar pickups and preamp. Settled on this: https://www.muziker.co.uk/aguilar-obp-3sk-pp Copied from your link Includes stacked Treble/Bass pot and separate Mid pot. Mid pot is push/pull for Midrange frequency selection Bass control: plus/minus 18 dB @ 40 Hz Mid control: plus/minus 16 dB @ 400 Hz or 800 Hz. User selectable frequency center Treble control: plus/minus 16 dB @ 6,5 KHz Input impedance: 1 meg ohm Output impedance: 100 ohm 9 or 18 volts operation Distortion: .019 into 10k ohm load Noise: -95 dBm unweighted Battery life: 324 hours Wire lead length: 16,50 cm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.