Jump to content

Darkglass Microtubes 900 V1 amp Now Sold

Recommended Posts

Posted (edited)



Darkglass Microtubes 900 V1

Includes the official Darkglass case and Intelligent Footswitch and its all in pretty much unmarked condition with no issues. Switchable dirt/clean channels, variable low and high mids and runs down to 2 ohms if required.

These amps will do a superb clean sound as well as the VMT/B3K dirt stuff that Darkglass are better known for. Huge headroom and it's probably the loudest amp i've ever had - it's scary! 

Collection or meet up is preferred but if you're happy to arrange a courier i can pack and post it. 

Located at Herts/Essex border near Stansted Airport.

Thanks for looking :-)












Edited by Mudpup
  • Like 1

Share this post

Link to post
Share on other sites
Posted (edited)

I've had a think and it seems like posting it is the way forward.......so i'm happy to do it :-)


Edited by Mudpup

Share this post

Link to post
Share on other sites

Sunday roast beef bump.....

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Higgie
      Barely used and as new, Fender Rumble 800 head. £420+postage, or can be collected from Brentwood.

    • By Higgie
      Up for sale is an excellent condition Bergantino Forté amp head. Owned from new, and not had much use (especially in the last year! 🤣). They are £950 from Bass Direct, so grab a bargain at £800 £725.
      4 Band EQ
      Onboard Compressor
      Aux In and Headphone Jack
      Effects Loop
      DI Out with Pre/Post switch
      700W RMS at 4 Ohms, 800W RMS at 2 Ohms
      Can be collected from Brentwood, Essex or can be posted at cost. 

    • By Sapatown
      I am wondering if the Matamp GT2 MKII works for bass aswell? I know its a 100w tube amp, and I will pair it with an Ampeg 810 or a Barefaced SIX10 (610)
      One channel is based on the GT1, and the other channel is a bit more high gain, I assume its a guitar amp, but I have heard the brand makes amps that works for more than guitar.
      The Barefaced 610 do have 1500 watt RMS. Do you think that would be a cool amp and cab pair? Any experiences?
      And will it be loud?
      I really don't know if the Matamp GT2 works good for bass, but I have the chance to go try it aswell. Just wonder if any of you know this.
      I know bassists that use their G120 with their cabs and love it. I also know bassists that use the Matamp 1224. But I have way to little experience with this brand myself,
      but love their style and sound.
    • By BCH
      SONIFEX RB-HD2 HEADPHONE AMPLIFIER Analogue, 2 stereo outputs
      Excellent condition and fully working. Great for live wired IEM or headphone rehearsals /studio. Original box
      The RB-HD2 is a high performance 2-way stereo headphone distribution amplifier for driving up to 2 pairs of professional stereo headphones from a single stereo or mono input. A switch on the rear panel enables the distribution of a mono signal to all four outputs (i.e. both earpieces of a pair of stereo headphones) via the left channel input. The stereo/mono switch is located on the rear panel to prevent accidental knocking.
      The XLR-3 inputs are electronically balanced and can be wired unbalanced. There are two pre-set controls on the rear panel that adjust the level of the master input signal to the outputs. Each output is on a ¼” stereo jack socket and is designed to drive 150mW into 32 ohm to 600 ohm stereo headphones. The outputs are individually buffered with their own front panel volume control. A LED power indicator on the front panel displays the power supply connection.
      Audio Input Impedance >20kΩ balanced bridging (main) Max Input Level +28dBu Input Gain Range -12dB to +20dB gain (pre-set pots) Output Level Drives 150mW into 32Ω to 600Ω headphones Volume Controls -80dB to +11dB gain   Connections Main Stereo Inputs 2 x XLR 3 pin female (balanced, can be unbalanced) Outputs 2 x ¼” (6.35mm) A-gauge 3-pole stereo jack sockets Mains Input Filtered IEC, switchable 110-120V, or 220-240V, fused, 9W max Fuse Rating Anti-surge fuse 100mA 20 x 5mm (230VAC)   Anti-surge fuse 250mA 20 x 5mm (115VAC)   Dimensions (WxDxH) 48.0 cm x 10.8 cm x 4.2 cm Boxed Dimensions (WxDxH) 53.0 cm x 20.5 cm x 6. cm Weight 1.35 kg Boxed Weight 2.00 kg https://www.canford.co.uk/Products/95-645_SONIFEX-RB-HD2-HEADPHONE-AMPLIFIER-Analogue-2-stereo-outputs
      Collection or post UK only £15

    • By MrT-Bass
      Darkglass Hyper Luminal Bass Compressor - VGC with original box, etc...£170 + FOC shipping in UK
      Bank transfer preferred but PayPal (Friends and Family) could be fine too!

  • Create New...