gadgie Posted November 2, 2014 Share Posted November 2, 2014 Hello BC I've got a pair of Peavey Bass Bins. I'm pretty sure they have a build in cross over which is switchable (but I'm not sure). These are quite old Hysis models. Do I simply run a cable from my PA amp into them, then up the the tops? Cheers Quote Link to comment Share on other sites More sharing options...
taunton-hobbit Posted November 2, 2014 Share Posted November 2, 2014 Go to the Peavey website (Google Peavey hysis)) the Hysis manuals are on there in PDF. Quote Link to comment Share on other sites More sharing options...
deepbass5 Posted November 2, 2014 Share Posted November 2, 2014 The hysis do have crossovers - just need to double check these are working OK access via speakon back plate I did cook mine once - and managed to order new and changed easily - just a small board on vehical type spade connectors between speakon and speaker you will need the correct speakon cables note if you have peavey tops say hysis 1 then you need to mark up the connecting leads as the out connector will be 2+ 2- and the in will be 1+ 1- I made my leads up so marked the top hi speaker connector so i could get it right first go on dark stages. If you get stuck Pm me as i think i have the old info, but would think you can find out on the Peavey site. So thats from Amp to left socket of sub 1+ 1- then right socket of sub out connector 2+ 2- to Hi top in connector 1+ 1- Quote Link to comment Share on other sites More sharing options...
gadgie Posted November 2, 2014 Author Share Posted November 2, 2014 Thanks guys. Good info Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.