tom skool Posted August 15, 2013 Share Posted August 15, 2013 Any ideas why the cap on my columbus j bass goes inbetween the 1st lug(going clockwise)of the tone pot to the 3rd of the bridge vol pot? The rest of the wiring is standard according to the diagrams I've found and cant find any diagrams where its done this way. Does it make any difference? If so what? its a .047 cap and the pots are 500k. Also if A is log and B is linear. what is D?? my tone pot says D500k! cheers tom Quote Link to comment Share on other sites More sharing options...
Grangur Posted August 15, 2013 Share Posted August 15, 2013 Can you post the circuit diagram? Or maybe some pics of the wiring? Quote Link to comment Share on other sites More sharing options...
tom skool Posted August 15, 2013 Author Share Posted August 15, 2013 its basicly this but instead of the cap going from the 1st lug to the pot body it goes to the 3rd lug of the bridge pot Quote Link to comment Share on other sites More sharing options...
Grangur Posted August 15, 2013 Share Posted August 15, 2013 (edited) Do you mean it links with the black wire from the pick up? If so the capacitor in that circuit is in series with the tone capacitor linking the signal to earth. This is quite normal. I can draw this for you as a circuit diagram, but not right now on my phone Edited August 15, 2013 by Grangur Quote Link to comment Share on other sites More sharing options...
tom skool Posted August 15, 2013 Author Share Posted August 15, 2013 no, the other one. On this diagram it would be the lowest lug on the bridge vol over to the right hand side lug of the tone as shown. Quote Link to comment Share on other sites More sharing options...
Grangur Posted August 16, 2013 Share Posted August 16, 2013 (edited) Are you talking about the wiring on a brand new bass from a shop? Or is this a 2nd hand bass where someone may have "upgraded" the elects? Does the tone pot work/function well as it is? Over about 3 years of buying 2nd hand basses I've found most have caps wired in the wrong place, so the tone doesn't function. The other thing folk do is put in 500K pots where 250K should be used. Edited August 16, 2013 by Grangur Quote Link to comment Share on other sites More sharing options...
ikay Posted August 16, 2013 Share Posted August 16, 2013 (edited) [quote name='tom skool' timestamp='1376577090' post='2176334'] On this diagram it would be the lowest lug on the bridge vol over to the right hand side lug of the tone as shown. [/quote] If you mean like the diagram below then when the tone pot is fully up the resistance of the tone pot will be in parallel with the capacitor rather than being in series (as standard). I'm not sure what effect this has but the cap isn't connected to ground so the signal should retain treble. When the tone pot is fully rolled off the capacitor is effectively bypassed so there will be no treble roll off. Does the tone control in your Columbus actually work?! [attachment=141626:jazz-bass-std.jpg] Edited August 16, 2013 by ikay Quote Link to comment Share on other sites More sharing options...
AngelLaHash Posted August 16, 2013 Share Posted August 16, 2013 Volume: output:input:ground (its up to you to get it the right way for your numbers but both ways work) Tone: cap(ground) :input (don't care were you put them as long as they are next to each other, so one HAS to be in the middle) Quote Link to comment Share on other sites More sharing options...
Grangur Posted August 16, 2013 Share Posted August 16, 2013 If you're looking to rewire your Jazz, I'd suggest you could do a lot worse than to wire it as shown in the circuit diagram you've posted. It's a standard, tried and tested circuit. It certainly won't blow anything up. Quote Link to comment Share on other sites More sharing options...
BILL POSTERS Posted August 19, 2013 Share Posted August 19, 2013 If I understand you right, its electrically the same thing as that terminal n the bridge vol is at ground anyway. I take it its working, sowhy worry ? Rule No.1 in my book. If it aint broke, dont fix it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.