dannyt144 Posted June 18, 2012 Share Posted June 18, 2012 Very Good condition little use just over two years old I’ve had it as a ‘back up’ rig but only used it once when my other rig was having its service! Sounds great and looks nice. Only thing to mention is there is a plastic port missing on the rear off the cab! Don’t know how/where!! Only noticed when I was taking the pictures for the add, un-noticeable to and audience and absolutely un-noticeable sound wise. Good strong reliable amp. Amp to be collected from Stourbridge, West Midlands The Blurb! [b][u]Ashdown C115 Mag Evo II combi[/u][/b] At the heart of the MAG C115-300 EVO III combo lies a feature-packed bass preamp with rotary bass, middle and treble controls, along with supplementary rotary controls providing 15dB of cut and boost at 220Hz and 1.6kHz. Additionally, front panel push switches for Bright and Deep settings provide instant access to attacking and warm, rounded sounds respectively and, on the subject of low-end response, the trademark Ashdown sub-harmonic generator is ready and able to deliver truck loads of earth moving tone if called upon. With the MAGs now achieving EVO III status, the amplifier also includes a built-in compressor with precision sonic control. Along with the all new tube emulated drive control for that extra bit of grind with your tone. Fueled by a potent 300W power section, MAG C115-300 EVO III combo features inputs for active and passive instruments, along with an effects send and return, a tuner/line output and a balanced DI output for direct connection to a mixing console. The combo delivers its payload via a single 15" driver .[b]Specifications[/b] [b]Power Output [/b](RMS) 307W [b]Power Requirement[/b] 230 / 115V [b]Speaker Outputs[/b] 2 x Jack Outputs [b]Line Input[/b] Impedance 22k Ohms / Input level 0dBu nominal [b]DI Output[/b] 600 Ohms balanced / Level -20dBu nominal [b]Tuner Output[/b] Impedance 22k Ohms, level 0dBu nominal [b]Impedance[/b] 8 ohm [b]Output Impedance[/b] Minimum 4 ohm [b]Signal to noise[/b] Better than 80dB (EQ flat) [b]EQ[/b] Bass +/-15dB @ 100Hz Lo Mid +/-15dB @ 220Hz Middle +/-15dB @ 660Hz Hi Mid +/-15dB @ 1.6kHz Treble +/-15dB @ 7kHz shelving Deep +8dB @ 50Hz Bright +10dB @ 10kHz [b]Effects Send[/b] Impedance 22k Ohms, level 0dBu nominal [b]Effects Return[/b] Impedance 22k Ohms / Level 0dBu nominal [b]Distortion[/b] Less than 0.5% THD [b]H x W x D [/b](mm) 581 x 474 x 300 [b]Weight [/b](kg) 28 [b][u]Ashdown 210T Deep Cab[/u][/b] [b]Specifications[/b] [b]Power Handling[/b] 250W continuous [b]Speaker Configuration[/b] 2 x 10" + tweeter [b]Frequency Response[/b] 60Hz - 20kHz [b]Speaker Outputs[/b] Jack & Speakon [b]Impedance[/b] 8 Ohms [b]SPL[/b] 98dB 1W @ 1m [b]H x W x D [/b](mm) 468 x 604 x 420 [b]Weight [/b](kg) 29 [attachment=110756:photo-7.JPG] My apologies i don't know how to rotate pictures!! Link to comment Share on other sites More sharing options...
grum Posted June 18, 2012 Share Posted June 18, 2012 Hiya - quite interested in this but it's a long way to drive from Lancaster. Don't suppose you might be interested in meeting me half-way or something? Link to comment Share on other sites More sharing options...
dannyt144 Posted June 18, 2012 Author Share Posted June 18, 2012 Hiya the bass at my parents I live in London so that won't really be possible Link to comment Share on other sites More sharing options...
grum Posted June 19, 2012 Share Posted June 19, 2012 Ok never mind, ta. Link to comment Share on other sites More sharing options...
dannyt144 Posted June 19, 2012 Author Share Posted June 19, 2012 bump! Link to comment Share on other sites More sharing options...
dannyt144 Posted June 20, 2012 Author Share Posted June 20, 2012 Bump Link to comment Share on other sites More sharing options...
dannyt144 Posted June 20, 2012 Author Share Posted June 20, 2012 Bump Link to comment Share on other sites More sharing options...
dannyt144 Posted June 21, 2012 Author Share Posted June 21, 2012 Bump Link to comment Share on other sites More sharing options...
dannyt144 Posted June 22, 2012 Author Share Posted June 22, 2012 Surprised this hasn't been snapped up !! Great amp and I think reasonable price am I wrong?? Is it over priced?? Link to comment Share on other sites More sharing options...
dannyt144 Posted June 22, 2012 Author Share Posted June 22, 2012 UmpErty bump Link to comment Share on other sites More sharing options...
dannyt144 Posted June 24, 2012 Author Share Posted June 24, 2012 Bump Link to comment Share on other sites More sharing options...
dannyt144 Posted July 1, 2012 Author Share Posted July 1, 2012 Bump Link to comment Share on other sites More sharing options...
dannyt144 Posted July 6, 2012 Author Share Posted July 6, 2012 bump Link to comment Share on other sites More sharing options...
dannyt144 Posted July 11, 2012 Author Share Posted July 11, 2012 Bump Link to comment Share on other sites More sharing options...
spluker Posted July 11, 2012 Share Posted July 11, 2012 Hey, Would you sell the cab on it's own? If yes, how much would you like for it? I would pick it up from Stourbridge myslef. Cheers. Link to comment Share on other sites More sharing options...
dannyt144 Posted July 11, 2012 Author Share Posted July 11, 2012 Hiya ideally i would like to sell the lot Link to comment Share on other sites More sharing options...
spluker Posted July 11, 2012 Share Posted July 11, 2012 (edited) Well drop me a PM when things get desperate Free bumpy for Ashdown! Edited July 11, 2012 by spluker Link to comment Share on other sites More sharing options...
dannyt144 Posted July 11, 2012 Author Share Posted July 11, 2012 Cheers buddy gona bang it on eBay soon but wanted to give fellow bass chaters a chance 1st Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts