thunderider Posted December 4, 2011 Share Posted December 4, 2011 i have 2 150 watt heads and want to link them,will this give me more power...300watts? but what im looking to do is run bass into input amp1...then line out of amp 1 in to input of amp2 then spekars out of amp 2....is this correct? Quote Link to comment Share on other sites More sharing options...
ShergoldSnickers Posted December 4, 2011 Share Posted December 4, 2011 You'll need each amp to be running a seperate speaker cab. You can take the line out from the first amp and have this as the input signal for the second amp, preferably into a line in if it has one. If you are using an effects send as the signal on the first amp, some amps will mute if there is nothing coming back in to the effects return, so watch out for that. There is no way to combine the actual speaker power outputs into one cab. Quote Link to comment Share on other sites More sharing options...
warwickhunt Posted December 4, 2011 Share Posted December 4, 2011 As above + to get the best from your intended set-up you are going to need a pair of 4ohm cabs as opposed to the more common 8ohm. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.