Jump to content
Why become a member? ×

***NOW SOLD****As new 3U ABS Studiospares Trojan Rack Case F/S £35


Recommended Posts

***NOW SOLD****

As new, £35 collected from Harlow, Essex. Photo is actually of 2U version, 3U is 1.75 inches taller allowing 2U for amp and 1U space for FX or tuner. Thanks for looking. Here's the blurb:-

[b]STUDIOSPARES TROJAN MKII ABS CASES[/b]
[i]Designed to ensure that equipment arrives at it's destination in good shape.[/i]

Following the success of the Trojan ABS MKI Cases we now introduce an updated version with three revisions.

1. For increased strength the case thickness is increased from 2.5mm to 3mm.
2. Drawbolt tension is more consistent with the inclusion of tension springs.
3. Discolouration of the aluminium extrusions corners is solved by plating the aluminium AFTER it is bent through 90 degrees.

These ABS cases have rackstrip BOTH ENDS. Bracing is moulded into the body and lids to provide added rigidity. A gasket is sunk into the edge of the lid. This is compressed by a lip on the body to form a tight seal against dirt and liquids. Drawbolt locks are fitted to make the lid shut tight. Cases may be stacked without sliding off. Corners are strengthened by metal plates to form the anchoring point for the equipment. The equipment mounting strip is threaded (M5) so it is impossible to lose caged nuts. Case length is 550mm which is slightly longer than most. Plugs can therefore remain permanently connected during transit. The distance between rackstrips is 480mm.
***NOW SOLD****

Edited by Sparky Mark
Link to comment
Share on other sites

  • 3 weeks later...
  • 3 weeks later...
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...