Truss rod allen keys for Warmoth

[Guest BassKS]

hi guys,
bought a warmoth neck and Im trying to put a relief on the neck. none of my allen keys fit, metric or imperial.
Anyone with experience on this?

Ta

Fatos

[icastle]

[quote name='BassKS' post='1049988' date='Dec 6 2010, 10:47 PM']hi guys,
bought a warmoth neck and Im trying to put a relief on the neck. none of my allen keys fit, metric or imperial.
Anyone with experience on this?[/quote]

Well if neither metric or imperial keys fit it must be something other than the standard size keys that are in general circulation.
I think I'd be tempted to drop the Warmoth support desk an e-mail - [email protected] - they should be able to advise and might even be able to supply you with an appropriate key.

[Al Heeley]

so its a hex socket but all the allen keys you have are either too small or too big, yes?
My warmoth neck is fine with a 3/16th key, should be same as a jazz bass.
Maybe a silly Q but have you got a full, comprehensive set of allen key sizes in metric & imperial?

[MoonBassAlpha]

[quote name='Al Heeley' post='1050028' date='Dec 6 2010, 11:17 PM']so its a hex socket but all the allen keys you have are either too small or too big, yes?
My warmoth neck is fine with a 3/16th key, should be same as a jazz bass.
Maybe a silly Q but have you got a full, comprehensive set of allen key sizes in metric & imperial?[/quote]
Agreed - some imperial allen key sizes on American gear can be odd eg 11/64" Not all sets have these daft inbetween values.
It would help if you said which were too large and too small. Some clever fellah on here is bound to be able to work it out.