Prime_BASS

Markbass Classic 104. £300 or trade for traveller 102p.

Nottingham/Derby

500w 8 ohm. Loud as hell, sounds brilliant, sealed goodness but articulate and none wooly. 27kgs.

Made in Italy, and the same as the new casa versions but without the hefty cost and some extra mojo? 

Pretty rare in that these cabs don't come up for sale. 

Willing to meet within around 60ish miles of Nottingham/Derby but ideally collected. 

Reason for sale is that me and my partner were in a car accident and since my shoulder hasn't been the same so down sizing to help elevate any undue stress. 

Bruh

1 hour ago, Quatschmacher said:

@Prime_BASS, weren’t you after one of these again?

Yes however this one doesn't quiet fit my check list exactly unfortunately.

Added new pictures now haha. And a gif.

Excellent thanks for that. Just had a moment of panic as I tried to think of the key logically with my limited theory.

These are just my bass notes. Then the guitar plays these notes along with a f# for every note, to make a chord? 

It's safe to say I'm a bit musically dumb. I know enough to get by and to usually tell of something is out/off, but usually if it sounds good it is good.

So I've wrote a song with the band we are in the process of recording and it's come to my attention it might not be totally all in key.... 😧.

The verse is in 4/4 and goes a little like.

E...D#...B...A#./B.

So the last bar is two counts of A# and two counts of B.

Now it's just come to my attention that neither Emajor or E minor has all these notes. With major missing D# and minor missing A#.

Do we have to start again ? Haha! 

No one wants this cause I have crap picture type bump 

9 hours ago, songofthewind said:

I’ve got one of these. Fecking brilliant, and none of the infamous pop described by ovnilabs.

GLWTS.

Not read that review, but agree never had any pop when it engages the compressor at all. The only reason u don't use the compressor side is that I've set my bass up to be pretty even and then use loads of overdrive which naturally compresses the signal anyway

We all know what this is.

Want to get a BB preamp back so trade only for that or sale for £110 posted to UK mainland.

Box and instructions included. Some wear and velco on the base.

Would trade for a camera of equal or less value plus cash, or a MacBook of equal or less value plus cash.

Price drop to 800

Forgot to add, I changed the pickgaurd screws to new black ones however I do have some new silvers ones I will put in with it as well. 

As far as trades go, I'd only be interested in a very nice P bass with a jazz neck, or a an early EBMM sterling with bridge mutes, with a maple fingerboard.

Acquired from eBay on a whim and despite it being a great bass just isn't for me tonally. 

Only asking what she owes me as I've put a lot more into it since owning it.

2004-2010 deluxe jazz bass, weighs 8.4 lbs

According to serial database was made on the back end of 2003 and despite its age is in fantastic condition.

I brought a bunch of genuine fender parts to replace broken/missing parts and only replaced what it needed, so nothing major has been taken off. 

Has had a fret polish, fresh strings and two setups done. Pretty low action but IMO would need a shim to get the perfect height (for me and I like it very low >3mm at the 12th fret) 

£800 posted.

£750 collected.

Comes with a generic gator hard case

The pics!

Location?

As above really. Want a replacement pre-amp to go into this fender American deluxe bass I have. 

I'd like to keep it as it is really but not have to do any work so want a drop in sort of job. 

So it's volume, blend, stacked bass treble, mids and then the Jack is on the side. Also for it to run, 9 and 18 volts, and maybe a passive mode too of possible.

Ideally don't want to be soldering in any pots and just either clip in the pickups or solder the pickups in. Easy peasy.

A quick look through bass direct and most seem to require a lot of work to get on the bass.

Added a white jazz pickguard

Wow.

Shame I can't try it.

On 30/01/2018 at 17:54, Prime_BASS said:

Can't use the new site properly yet but think I've replied to everyone. Edited with some more details about the body and added a picture of the bridge.

Recent purchase but decided to use very little of it as it goes. Plus some other stuff I've been hanging onto for no reason.

Pictures below. All prices include postage. Open to offers

White "62 reissue jazz bass pickguard. I believe I took this off a 90s Japanese import fender reissue, but I have had lots and lots of similar and brought similar too, but I have had this for years too. Has a sticker with a bar code on the back that might help identify it. Does have a crack shown in the pictures. £10

Generic Jazz Bass pickups. As are really, pretty nice sound though. Vintage cloth wires. £15

Red Tortoise Shell Pickguard. Not the best cut and obviously not real, but nice looking. Shielded on the back £5

Hipshot B style bridge, satin. Very very light, but sturdy, a go to bridge for me. I may keep this yet, but would like a black or chrome version.(hence no picture) £35

kIogon single Volume wiring loom. Brilliant as always with his stuff. Have a V+T from him in my main bass. £10

Everything is hopefully priced to go asap. Bare with me as I am using my mobile but will try and reply ASAP.

Brought a bitsa bass. Was pretty much as described and packaged extremely well!!!! 

Would buy from again.

For anyone interested, there is one for sale to the US market eBay with its location in Japan, haven't had a good look at pictures myself though. I want to go have a look but I'm on the lookout for a sterling with mutes and maple board.

Love my classic 4x10 and would be all over this if I could 

Can I call dibs on the 66 if the sake falls through?

I see location is the Netherlands, are you offering postage the UK/EU