bgmttt

Up for grabs is my Moon JJ4. Ebony fretboard, brass nut, the body looks like alder... The preamp is the legendary Bartolini TCT, the original Marcus Miller preamp. Мany scratches and dents on the body. The neck is straight, the frets are polished. 4.240 kg Hard to beat (at any price) in terms of sound, playability and craftmanship.

Sold, unfortunately outside our BC brotherhood

Up for sale is my Ampeg Heritage SVT CL head+8x10 cab. One of the best Ampegs ever made, limited run, entirely USA made, now very hard to find new. Bought brand new from Thomann 7-8 years ago. Never gigged, hardly used in rehearse studio only. The price include shipping within EU and UK Full specs. you can find here: https://www.stars-music.com/ampeg-heritage-svt-cl-head-usa_134709.html https://www.stars-music.com/ampeg-heritage-svt-810e-cab-usa_134712.html or on the Ampeg site. If you offer me a trade please keep in mind that I like Jazz necks and dont like active electronics. Any questions please ask. Cheers!

Here you can check my feedback: https://www.basschat.co.uk/topic/142127-feedback-for-bgmttt/?tab=comments#comment-1276030

Here you can check my feedback: https://www.basschat.co.uk/topic/142127-feedback-for-bgmttt/?tab=comments#comment-1276030

I can arrange this. Please let me know where are you located.

Here is my Fender Precision 57 RI Made in Japan. N serial-FujiGen made around 1993. 42.3mm width at the nut, 4.095 kg. Punchy and powerful sound. Shipping to Europe included. Any question please ask. Cheers!

Here is my ESP Custom Fretless. Made in Japan, passive, ebony board. Tried to photograph most noticeable nicks and dents. One piece ash body, skinny neck, the fretboard is not worn. Nut width is 38.2mm. 4.075 kg. The price include shipping to Europe Any question please ask. Cheers!

"A" serial date this bass around 1985, just after JV and SQ serials and this is one of the best MIJ period. I have an "А" telecaster and never heard better one, compared with vintages, custom shop, etc...

The truss is not broken. Just the neck is dead straight before putting any tension in the truss rod. The truss is fully working. That's all...

No, you cannot. The trussrod of vintage Fenders is working only in one direction.

The truss if fully working. The neck is straight without the support from the trussrod.

Here is my Yamaha "Ladybug" bass. Medium scale (32"), ash body, passive, VVT controls. The neck is super comfortable to play. Lot of small nicks and dents, tried to photograph them... 3.2 kg (7 lbs). Original gigbag in bad condition. Now is strung with very old long scale flats, but they work... More pics here: https://photos.app.goo.gl/5GT1rcteiKpAGNk59

Hi Roberto, . Just added a few pics to the dropbox directory. About the neck relief: this is the distance between the frets and the bottom of the string when the first and the last frets are pressed. Here is a pic of my bass: As you can see, there is a hair between the neck and the strings. You can adjust the action low or high, the neck is perfect. More questions please ask! Cheers, Youlian

The weight is 4.02 kg (8 lb and 14 oz) Thank you!

l Up for sale is my 74 jazz. All original, the neck pickup is rewound by Bare Knuckle. Solders are untouched, I cut and then re-solder the wires only (see pics). Please note: there is a small relief of the neck and you cannot make it bigger even with truss rod 100% slacked. Now the neck is perfect, straight with low action. Great sound, new Dunlop stainless strings. OHSC, all latches work. The weight is 4020 grams and this is lightest jazz from this era I ever seen. Ton of pics here: https://www.dropbox.com/sh/23y3nzb7rie58kc/AAAgi21ghMyEdq-pL4p4gBsta?dl=0 Any questions are welcome. Best! Youlian

Sold!

Here you can hear it: click Both pickups, then bridge, then neck. Tone is always 100% open. Strings are old LaBella Flats.

Last chance before Brexit....

New price: £780 Delivered! Last chance before Brexit....