Jump to content
Why become a member? ×

Aidan63

⭐Supporting Member⭐
  • Posts

    761
  • Joined

  • Last visited

Posts posted by Aidan63

  1. Brian sold me an electric sabre saw from the sell anything listings; Evri were their usual slow (it was a bhol weekend) and awkward at his end accepting it but all good left in my safe space, but witjhout letting me know it was out for delivery or had been delivered so it was the next day before I found it.

    Top man, thank you

  2. 9 hours ago, LowB_FTW said:

    I'm sorry, the what now?!? 😳

     

    Mark

    Initial Response Acceleration (I.R.A.) treatment 

     

    basically they vibrate it to give it better 'vibe', like some do with acoustics, put a speaker on it and play the instrument different frequencies to simulate the effect of hours of play

     

    as with tone wood its a thing or hookum depending on your point of view

    • Like 1
  3. Had a look at some of the picture's in Geddy's book, obviously not many close up shots of the backs of the headstocks and rarely shot square on but you can see notches on at least one of the 50s Ps and a '63 Jazz quite clearly, treble or bass side, and also evident on quite a few Reverb listings of original tuners using google search, and they vary in how pronounced they are, and often visible from the back but barely evident on the hidden front face which suggests to me the tools worked loose during the stamping runs so didn't always make properly square contact

  4. or you could use a plug cutter to cut the wood around the screw and then dowel the hole once you have broken off the plug with the screw still inside, cheap set about £12, smallest diameter 6mm can cut something like 25-30mm deep

    Last weeks twoodford yt video showed him using a home made plug cutter to extract a headless 3" screw from a previously 'repaired' guitar neck joint

    • Like 2
  5. 2 hours ago, AndyTravis said:

    Great white BB414 at ridiculous bargain price = happy me.

     

    apparently needs some electrical fettlement…but it looks balls ace.

    C0690F8B-0F04-4D7F-8107-E3A9DCC7CD01.jpeg

    and likely for sale once fettled, at a loss or just breaking even, eh Andy ?

  6. 20 minutes ago, ead said:

     

    Is that an actual Sandberg one or another make?

    I don't know, I asked the Q on here a couple of years ago when I bought my Lionel s/h, and no one knew, you seem to need to interact with sandberg on facebook or twitter, they do come on here but not routinely, some of the members on here are tight with them, some maybe endorsees or sponsored by them. Maybe ask BassDirect they are a dealer/agent

  7. Neither Scott or Ian are 'merican, so they maybe don't pander quite so much to the whole MAGA boutique builders thing that some from the US would; they've had them, but maybe prefer things with a bit more character/flaws - they also have personal relationships with Lull and Overwater and others; by the same token they are probably not reciprocally on Spector/Warwick or Sadowsky's radar much themselves so aren't likely to be leveraged by those brands in order to increase those companies' sales.

     

    Surely it's a good thing to have a variety of builders and products, better than a choice of only FMC and Gibson and their subsidiaries

     

    Buy British, Buy Canadian, buy European even, especially now.

     

    The UK is a big enough market to support a number of mass produced and boutique manufacturers, but if peeps keep buying from the states (and from US owned businesses) then we'll never expand those small companies here and they'll remain for the most part 1 man and a few workshop staff businesses. Crimson, Gordon Smith etc.. are growing (were growing ?) but most of the money is be made making guitars not basses. Importing instruments is bad for the local manufacturing base.

    • Like 2
    • Confused 2
  8. If peeps are interested in having a hang with Janek and IMA and others then you need to post in comments on Janek's YT vid I linked to a couple of posts back, as he responded to my suggestion he and Ian come on here saying he doesn't do socials and no longer has login on here or TB

    • Like 1
  9. is the original truss rod made of left hand thread bar ? Is it straight or curved ? Was the slot flat top and bottom or curved ? What's the tpi or thread pitch ?

    Just trying to get my head around how it worked compared to say the original Fender truss rod design, as opposed to the more modern design type Martin is using to replace it.

    I traded my Maruszczyk back through BD a good few years ago, never had any problems but it was incredibly sensitive to adjustment, forget your 1/4 turn adjustment, you'd move it just 5' and the neck relief would move by 5 thou 

  10. most companies use 22Awg I believe which is 0.34mm, or 20Awg which is 0.5mm and very commonly available

     

    one way to increase contact with the bridge is to fan the strands and then sandwich with copper foil to increase contact area and stop the wire being pushed into the finish/wood like is sometimes seen

    • Like 1
  11. Enjoyed Sungazer (Adam Neely and co.) last night at Future Yard venue in Birkenhead; great gig, plus interesting QandA session before the gig, nerding for the nerds, bass and otherwise

    Stood next to the FoH desk and the sound was epic, spent half the gig eyes closed bathed in 3D aural and physical music - didn't much like the venue stage lighting (really bright strips behind the stage facing forward, most bands they'd be either side/behind the drums so less visible bit this band have bass and drums either side and sax and guitar in the middle) but that was the only downside, other than price of beer, the on site food was good with vegan option and a really chilled relaxed attitude all round, had a chat with security guy, who really had an easy night.

    We had a chat with the promoter when we arrived, and got her business card - original music is her thing.......fyi

  12. Reduced asking price for BC,  SOLD for £330 delivered 🙃

     

    I am not gigging so no longer need a powerful, versatile, compact, and what I would describe as transparent, amplifier. I have been using an Ampeg SGT-DI with it for a very convincing (to my ears) B-15 sound through a BC MkIII Cab. 

     

    Amplifier is in very good condition, not many hours use, and is complete with original box, packaging, mains lead with UK 3 pin plug and manual.

    There's a very slight scratch on the top, looks like maybe the plug marked it when picked up with the lead to move it but it's not dented. The black brushed aluminium case shows every fingerprint and the very slightest mark. It has lived in a padded RokSak when not being used with foam protecting every edge and cables in separate pockets.

     

    This is lifted direct from the PJB website (with added i in the metal 😉)

     

    Small and lightweight just got more powerful with the introduction of Phil Jones Bass’ BP-800 bass amplifier. The BP-800 is a high power, high performance no compromise compact amplifier that delivers more bass for the buck. The BP800 features a Class A pre-amp with the popular PJB 5-Band EQ.

    Although it weighs only 5.7 lbs and is 7.5” wide the BP-800 is built with the ruggedness and precision needed to withstand all the rigors of live performance and the road. The appealing blue front panel is a quarter inch thick and CNC machined while the chassis is built from thick aluminium extrusion making it incredibly strong. All control knobs are PJB design solid aluminium billet for a high end look and feel.

    The BP-800 will work on any AC voltage from 100- 240 volts AC enabling it to conveniently travel worldwide without having to switch to local AC supply voltages. The Power Output is 400 watts into 8 Ohms, and 800 watts into 4 ohms (maximum load). The dimensions are 7.5” wide x 2.5” high x 12.5 “deep.

    Other features include Mute /Passive/Active Switch, Headphone out and auxiliary input jacks, Balanced line out with pre/post EQ and ground lift switches, FX send/return Jacks, Pre Amp out and Power amp input jacks and a High-Current Speakon Out.

     

    Price is with shipping with either Parcelforce or UPS to mainland UK other than premium price far flung areas.

     

    Tradewise, I am in the market for a tidy Macbook Pro 16 2019-on with a bit more than base RAM installed that can run current iOS and last a few more years as I want to leave Microsoft for good. 

     

    Not listed elsewhere, I don't do FB or W'App, so next move would be Ebay and or Reverb. Thank you for looking.

     

     

    WP_20250213_002.jpg

    WP_20250213_003.jpg

    WP_20250213_004.jpg

    WP_20250213_006.jpg

    • Like 5
×
×
  • Create New...