Protium

100g reel of Silverline 60/40 lead alloy solder
£3.50 posted

Small coil of lead-free solder, approx 2m
£2 posted

Another part of my mega bench clear-up

2.1mm PSU sockets, 3 pin to allow switching with 9V battery

Require 1/2 inch hole for fitting

[b]Singles: 60p plus postage[/b]
[b]Pack of ten: £4.50 plus postage[/b]

I have a ton of stuff cluttering up my workbench, including some white and black cloth covered wire which I don't need

It's single core, really easy to work with - you just push back the cloth cover exposing the wire to solder it

You get: 4.5 metres white and 3.5 metres black

[b]Sold[/b]

[quote name='Gordon Thudmaster May' timestamp='1366576037' post='2054425']
There's been some really great amps slated here! You DO need a GREAT BASS GUITAR before you slate an amp!
[/quote]

For example?

Bring back The Big Beef Chief

No info stating if it's made in Japan or Taiwan, plus it isn't the rare "Octaver" version.

Someone in work played it to me yesterday, the lyrics are absolute cringe

[quote name='Currrls' timestamp='1366137835' post='2048884']
Any chance of a link/video/sound recording so I can get an idea how it sounds?
[/quote]

The original soundclip I recorded for this pedal is here: https://soundcloud.com/protium/bass-fuzz
No EQing, clean bass at the start for comparison

I get better results baking enclosures, but 99% of them I leave as bare metal and print vinyl stickers. I'm seriously considering modifying a toaster

I assume m i n g e r

[quote name='Jag_Bassist' timestamp='1365954802' post='2046443']
yeah still the same problem. not run on battery either on a reliable t rex power supply
[/quote]

How old is your OC-2? The ACA versions can sometimes give you problems when on a 9V regulated PSU, try the pedal on battery power and let us know

[b]Now sold[/b]

Got a few bits and pieces that would suit an amp/cabinet project

Set of four 1.5" rubber feet with screws
Six chrome corners without screws
Rubber strap complete with metal end pieces, fixing screws and nuts

All are in used condition but fully functional

complete

Looks decent, I'd have to change the white plate though

Every single piece of Hartke equipment I've had the misfortune of attempting to use has been broken

no longer available

[quote name='BassManGraham' timestamp='1365168056' post='2036229']
How much does the cab weigh?
[/quote]

Just under 20kg

The 1212L is a BF Compact killer, I'd have the cab if I was able to collect.

Stringbusters

I found the Wizard Thumper was a bit too much, very happy with the Kent Armstrong Hot Vintage currently fitted

Bump

Bookmarked. Which layout are you using?

My ABM300 has managed heavy gigging for 7 years, being pushed hard I should add. Has needed nothing more than a minor service and a preamp valve. No lack of treble (learn to use the EQ maybe?), no fires!

http://www.ebay.co.uk/itm/111032410350

Dodgy serial # S389652

Looks like a Squier with a decal to me

I've seen a few people recommend a layer of clear nail polish over the poles so contact can't be made