Jump to content
Why become a member? ×

James Nada

Member
  • Posts

    346
  • Joined

  • Last visited

Posts posted by James Nada

  1. 2 minutes ago, Cato said:

    The Pretenders are a bit of a revelation for me.

     

    I'd onky ever heard their Christmas singke and Brass in Pocket and assumed they were a sort of middle of the road AOR band, but this awesome.

    Me too.  I'll be delving a little deeper into their back catalogue 

    • Like 1
  2. Does anyone have or could point me in the direction of a template for a Hofner Shorty Bass body?

     

    I'm planning on cutting down an old Encore short scale P-bass to create a travel/emergency bass and think a Hofner Shorty shape is a decent place to start.

     

    Cheers

  3. 1 hour ago, PaulThePlug said:

    Stereo Jack fitted wired Ring 'n Sleeve instead of Tip 'n Sleeve?..

    I'm not sure it can be that, assuming any amplifier input would be a mono jack input it wouldn't have a connection to the amp. 

     

    Edit: I'd guess a regular mono cable shorts between the tip and ground connection, but by using a stereo cable the "short" connection is touching the ring and not shorting the tip to ground.

    A new jack socket would sort it, though it might be that the existing one has bent a bit.

     

     

    • Like 2
  4. 33 minutes ago, Lozz196 said:

    Exactly what I was going to say. The BF is just a lot less “coloured” in comparison to the 410 so it’s a case of getting there with eq. 

    Me too 😂.  One of the deciding factors for me getting a BF Super was so the PA/DI feed was comparable to the cab sound.

  5. 18 hours ago, Obrienp said:

    Many thanks @James Nadaand @Maude. That was what I was hoping. I will take some tension off the strings but not so much that I mess up the intonation: I actually payed a luthier to set this one up as I have struggled with floating bridges in the past.

    If you're concerned with the bridge moving you could always put some masking tape on the body by the bridge and mark it's exact position before you start slackening the strings.

    • Like 1
  6. 50 minutes ago, Obrienp said:

    ...if I unscrew the strap button to replace it, is the string tension going to pull the tailpiece off the body, or are those two screws enough to hold it?

    The screws are there to hold the tailpiece anchor in position -the load of the anchor is on the end of the instrument, not the screws themselves. 

    So I'd think removing it will be fine.  You could always take the a lot of tension off the strings as a precaution.

    • Like 1
×
×
  • Create New...