donslow

@Bassassin I suspect your right and Thankyou again for the input, has been a massive help shes all clean, freshly strung, sounding glorious…now if I can just get ANY movement on the truss rod that’d help with setting her up properly! not sure if it’s rusted or knackered

Been cleaning her up, took the saddles off and low and behold, string anchor becomes more apparent… body before…. body and hardware nearly done…

Well colour me intrigued…. I took a peek under the saddles but couldn’t see anything obvious that screams “THE BALL ENDS GO HERE!!!” Agree thanks to the great minds of basschat lurkers Also agree yet mildly surprised

So…. once again, thanks for all the comments, have just heard back from hohner they seem to think… I think the basschat massive were more help than the people who know ha ha

@Bassassin It is very neat and tidy, there’s also a brass (looks brass anyway) plate installed into the rear route, I guess so as not to slowly drag the ball ends through the wood so it’s been well thought out

Thanks again guys (and gals?!) a lot of what has been mentioned here makes a lot of sense the more I look into it. starting to get a much clearer picture now, I did read somewhere they started adding “arbor series” to the headstock in the late 80’s (around ‘88 I believe) in which period they started making the headstocks more Fender shaped but then I’ve seen examples with the same headstock as mine with the arbor decal on it (like the one attached to the linked post above) oddly, there seems to be so much conflicting information amongst the very little you do find so once again, thanks to all the clever folk here that have shared what they know i emailed hohner to see if they could help and surprisingly they emailed back within a couple of hours asking for pictures, will be interested in what they think

@Bassassin Thankyou for that, has at least given me a bit of history on it for knowledge sake if nothing else, really appreciate the effort @Stub Mandrel so there’s every chance that the through body routing was an aftermarket addition?! Thankyou also, again, the advice and help is hugely appreciated

@Bassassin your a true gent, thankyou have been doing as much searching as I can and have found out that this is possibly a HG425 or HG450 as a model name/number which were produced between ‘78 and about ‘83 but Japanese rather than Korean, although that is mostly speculation on picture-less stuff I have stumbled across Realistically, would you still guesstimate around the same value you suggested previously?

Following on from this thread I picked said bass up from said work mate and have decided it’s a keeper… it needs a good clean up but seems to play and sound pretty good at the minute problem is, I can’t find ANY info on it ANYWHERE and it has no serial or markings anywhere i found this for sale on eBay which is the closest I’ve seen to it as it has same bridge, looks to be same pickups but has no through body stringing option like the one I have https://www.ebay.co.uk/itm/284053035803?mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338353466&toolid=20006&4236=&gbraid=0AAAAADtppYcrlmk7rWflojJT4ks9Ff7Ri%26customid%3Ds%3AGS%3Bgc%3AEAIaIQobChMIteKwt-7k8QIVB-ztCh2TWgcOEAQYByABEgJn7vD_BwE%3Bpt%3A1%3Bchoc%3A2&customid=s%3AGS%3Bgc%3AEAIaIQobChMIteKwt-7k8QIVB-ztCh2TWgcOEAQYByABEgJn7vD_BwE%3Bpt%3A1%3Bchoc%3A1&gclid=EAIaIQobChMIteKwt-7k8QIVB-ztCh2TWgcOEAQYByABEgJn7vD_BwE Could what I have be as old as the eBay example?! Can any of the basschat genius’ help out?! just for my own information in nothing else, any idea(s) on the what’s, when’s, where’s, how olds etc thanks in advance all some more pictures…

Ha ha don’tcha just

@Woodinblack Thankyou! You sir are a star! Will give that a go and test it out in the ‘morrow when there’s no risk of being shouted at for waking the rugrats…

Mellow yellow - Donovan

@PaulThePlug cheers fella, really appreciate the help according to guitarinsite I have this

@PaulThePlug apologies for coming back to this, opened up my bass and what I found looks quite different to what you had posted above… Bit lost as to where the loops could/should go…can I kindly ask if you have any ideas/suggestions at all?

Is there any danger in leaving that patch as is? does it make a difference if I have the mid cut/boost switch?!

Not entirely sure, they’re bartolini mk1 pickups

Thanks guys, appreciate the help, now to get it on the bench and (probably) make a pigs ear of it ha ha

@Woodinblack thanks for the advice, something to look into for sure but I have to admit, I zoned out and went a bit crossed eyed at Does that remove any trace of a tone adjustment option? Understandably it’ll sound different but Will it sound bad?! Just wondering after reading Amp is an SVT II Pro or Micro CL if that’s worth anything?! thanks in advance again

Apologies if this goes off topic somewhat but I was wondering if any of the Ibanez owners might be able to help with a little situation I’m currently having…

Hey all, I’ve got an itch, it needs scratching before I do something I’ll regret (selling a bass I love to bits) Currently have an Ibanez sr500 (as well as three sr300’s I’ve had “adjusted” for different pickup configurations) and love it to bits, problem is, I’ve started to become a bit more passive bass biased which means the 500 doesn’t get used as much anymore, Do I have any options to make this bass passive but still get the same noise(s) out of it? Despite knowing it’ll be an instant kind of regret, I’m dangerously close to getting shot of it and buying another 300 to mod with some passive soap bars (or something similar) anyone with a couple of 2p’s to throw into the pot? thanks in advance

Thankyou fella, was roughly what I was going to suggest, thanks again

Hey all, a work mate has happened upon a bass from a now departed family member of his and has asked me to help him value it I THINK I have a rough idea on what to tell him but thought I’d consult the basschat bass gods before I do... I haven’t had a chance to see the bass in person yet but have been sent these pictures... if anyone can advise it’d be very much appreciated many thanks in advance

Currently in the process of building a shell for a couple of micro amps does anyone know where I can get a suitable orange coloured tolex or similar without paying through the nose for it?!

I’m still standing - Elton John