koval123

@ Thornybank: no, they are regular machines. They have a nice feature: by turning the ferrule on the shaft you can change the gear initial tightness.

Yes, they are. There are also the original brass shielding plates in the cavity and under the pups.

Bump for free insured shipping within EU

Thanks White Cloud, they are indeed quite nicely built basses...

Up for sale goes my Tokai Jazz Sound TJB-45 bass from 1982. It's in great condition for its age and comes with thick padded made-in-Canada Levy's gigbag from the era. Flat-sawn maple neck with curved dark rosewood fretboard is comfy, smooth and straight. Truss rod working as it should, frets show some signs of use but there is still a lot of meat in them. Pickups are non-original but great-sounding Bartolini dual-coils (hum-cancelling). As you can see there is no pickguard, I believe the standard Fender 60's JB pickuard will nicely fit. Currently strung with a new 45-100 set of Fender stainless steel flatwounds. The weight is about 4,1 kg (9 lb) on my traveller scales. PayPal payment possible (buyer covers the fee), free shipping within EU. It will be well boxed and insured for shipping. More photos can be found here: http://s1030.photobucket.com/user/koval123/slideshow/Tokai Jazz Sound 1982?sort=9

Oh yes it is. Hopefully not for long as I have GAS on some handsome Status...

Time to sell my nice hand crafted Mayones BE4 bass. It sports mahogany/maple neck, topped with rosewood fretboard, over amazakoe (ovangkol) body in natural waxed finish. MEC active pickups are paired with active MEC BEC-2 (2-band) preamp with active/passive push-pull switch. The sound is tight and punchy, everything you would expect from dense exotic woods. Neck is nice and straight with truss rod working as it should, frets show little to no wear, action is set low. There are some scratches and tiny dents in the surface from normal use but nothing major. It's been well taken care of so its condition is very good The weight is about 3,9 kg (8,6 lb) on my traveller scales. PayPal payment possible (buyer covers the fee), shipping cost within EU would be GBP 30. It will be well boxed and insured for shipping. More photos can be found here: http://s1030.photobucket.com/user/koval123/slideshow/Mayones BE4?sort=9

... and sold.

The bass is now on hold.

Up for sale goes a nice Mayones Jabba Classic 5 string bass in very good condition. It sports maple neck, topped with rosewood fretboard, over alder body in glossy arctic white finish. Hardware-wise it sports brass bridge (wide strings spacing), Schaller tuners and straplock pins (straplocks included). Delano JMVC 5 FE pickups are paired with passive vol-tone circuit for each pickup, providing mighty, warm and punchy sound. She's like my wife - has beauitfull and innocent look but can be ruthless when you touch the right spot. Neck is nice and straight with truss rod working as it should, frets show little to no wear. There are some scratches and small dents in the finish on the bottom side of the body from normal use but nothing major. The weight is about 4,4 kg (9,7 lb) on my traveller scales. PayPal payment possible, shipping cost within EU would be GBP 30. It will be shipped in like-new Hicox Case More photos can be found here: http://s1030.photobucket.com/user/koval123/slideshow/Mayones Jabba 5 Classic?sort=9

bump

bump

Bump for free shipping within EU.

Lovely indeed The neck has a slim C profile with 38,5 mm width at nut, 19 mm thickness @ 1st fret (from back to fretboard excl. fret), 21 mm @ 5th fret and 23 mm @ 12th fret.

Bump

Hi Razor, I'm from Poland. Shipping to UK should take [color=#282828][font=helvetica, arial, sans-serif]£25 insured.[/font][/color]

I've updated photobucket with closeups of frets (for IFT technology) and night pics (for luminous markers). I'm not able to track the moment the neck was possibly replaced but it's lovely for sure.

I've sent an inquiry (along with hi-res pictures) to Warwick and here's what I got in reply: Dear Mr., thanks for your request and interest into your Warwick Bass and for giving me the requested information. Your Bass is an Warwick Bass from our Masterbuilt production in Germany, you can find it even on our Seriel Number finder : [url="http://www.warwick.de/en/Warwick---Support--Serial-Number.html#current_site_id"]http://www.warwick.de/en/Warwick---Support--Serial-Number.html#current_site_id[/url] - Bass Thumb Bass BO 4 string Serial Number H 108821 04 Year 2004 Month August Number 108821 Neck Wood Ovangok Wood Fingerboard Wenge Frets Bronce Warwick Frets Nut Just a Nut II Neck construction Bolt On Body 2 pcs. solid Bubinga Wood Surface Oil Finish / BeeWax surface Pickups 2 active MEC JJ Pickups Electronic active MEC 2 Band Electronic Hardware Black Hardware made for Warwick Made in Germany / 08258 Markneukirchen We wish you an ongoing pleasure playing your Thumb Bass BO 4 string Warwick Bass and if you have time and personal interest to join our Facebook page please signe up under - Framus/Warwick Facebook [url="https://www.facebook.com/warwickframus"]https://www.facebook.com/warwickframus[/url] with best regards Warwick GmbH & Co Music Equipment KG H.P.Wilfer 10.09.2017, 08:12 CEO

Bump for reduction to [color=#282828][font=helvetica, arial, sans-serif]£250[/font][/color]

@ Kev, I'll try to check this out, the previous owner should shed some light on the case.

UP

[color=#282828][font=helvetica, arial, sans-serif]Up for sale goes a nice used Warwick Thumb BO[/font][/color][color=#282828][font=helvetica, arial, sans-serif] 4 string bass masterbuilt in Germany in 2004.[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]You know it all about Warwicks: o[/font][/color][color=#282828][font=helvetica, arial, sans-serif]utstanding build quality and great ergonomics make you feel this sincere pleasure playing them.[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]This particular one is Masterbuilt - meaning that it was made by a single master luthier from start to finish. Meaning also that every detail is mastered .[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]It features super fast and comfy [/font][/color][color=#282828][font=helvetica, arial, sans-serif]Ovangkol [/font][/color][color=#282828][font=helvetica, arial, sans-serif]neck bolt-on [/font][/color][color=#282828][font=helvetica, arial, sans-serif]Ovangkol downsized curved body. Fretboard is of Wenge, frets are like new.[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]It carries only minor signs of use, namely some small scratches and tiny dents. I'd say it's 8,5-9 / 10. [/font][/color] [color=#282828][font=helvetica, arial, sans-serif]All original MEC JJ pups and 2 band MEC EQ (with passive mode), factory installed Dunlop straplock buttons (straplocks included).[/font][/color] It will be shipped in generic ABS HSC in good condition, [color=#282828][font=helvetica, arial, sans-serif]boxed and insured for shipping[/font][/color]. [color=#282828][font=helvetica, arial, sans-serif]PayPal payment possible [/font][/color][color=#282828][font=helvetica, arial, sans-serif]with transaction fee shared 50/50[/font][/color][color=#282828][font=helvetica, arial, sans-serif], ask me for shipping cost (limited to EU countries)[/font][/color][color=#282828][font=helvetica, arial, sans-serif].[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]Photos can be found here: [/font][/color][url="http://s1030.photobucket.com/user/koval123/slideshow/Warwick%20Thumb%20BO%204%20Masterbuilt?sort=9"]http://s1030.photobu...terbuilt?sort=9[/url]

bump

[color=#282828][font=helvetica, arial, sans-serif]Up for sale goes a nice Stingray clone made by Mayones under Fame trade mark (used for German market - for [/font][/color][color=#282828][font=helvetica, arial, sans-serif]reasons [/font][/color][color=#282828][font=helvetica, arial, sans-serif]unknown to me). It is well built with attention to details and offers very good tone and playability. It is also in a great shape, carrying only minor signs of use.[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]It sports alder body with maple neck and fretboard (42mm at nut), [/font][/color][color=#282828][font=helvetica, arial, sans-serif]Schaller tuning machines.[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]MM-style 4-coil passive pickup is paired with active 3-band Mayones preamp (controls are: vol-treble-middle-bass).[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]Neck is straight with truss rod working as it should, frets show little signs of wear.[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]The weight is 4,1 kg / 9 lbs[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]It comes with old used hardshell case which will protect it well for shipping.[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]Pictures can be found here:[/font][/color] [url="http://s1030.photobucket.com/user/koval123/slideshow/Mayones%20Flame%20Stingray?sort=9"]http://s1030.photobu...Stingray?sort=9[/url] [color=#282828][font=helvetica, arial, sans-serif]PayPal payment possible [/font][/color][color=#282828][font=helvetica, arial, sans-serif]with transaction fee shared 50/50[/font][/color][color=#282828][font=helvetica, arial, sans-serif], insured shipping cost within EU destination depending.[/font][/color]

Bump for another reduction - [color=#282828][font=helvetica, arial, sans-serif]£1300[/font][/color]