RandomBass
-
Posts
1,945 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Posts posted by RandomBass
-
-
[quote name='BluRay' timestamp='1449479642' post='2923756']
Depends on the model and obviously what sound you're after. For an ABM – I always start with the following, and make small adjustments to compensate for the room
Disable the “shape†button (button pressed in) and the compressor (if there is one).
Bass @ 10oclock
Mid: @ 12oclock
Treble @ 2 oclock
Bump the all the sliders very very slightly
A tiny bit of sub octave (just because its there)
Healthy amount of gain and drive.
Crank it up and rock out.
[/quote]
Most of the above, but I also found that boosting the 180hz slider gave me some nice low mid punch without low end being overbearing. I do something similar with my Trace heads. -
[quote name='Merton' timestamp='1449405289' post='2923183']
Sub, Drive and Compressor was EVO III so it won't be an early one, it'll be some weird special run of some sort from a few years ago. I saw a black-panelled one with brushed aluminium knobs earlier this year, that was called a Klystron too IIRC.
[/quote]
I had a 500w Klystron like this, it was basically an ABM in a bigger, heavier wooden case with lots of emptiness inside. The black fronted ABM with brushed knobs was a limited edition tart up jobbie that Ashdown put out for a short while a couple of years back. -
Well, as we only need to play it for a few gigs a year, and the punters love it, Slade's Merry Christmas Everybody gets my vote purely for the fun and singalong factor.
-
[quote name='Damonjames' timestamp='1449267519' post='2922190']
That band up there just keeps getting better...
[/quote]
How very poignant. -
Shame.
Core was a seminal piece of work, especially Crackerman. -
Hope it all works out. My band has been through 4 drummers - at one point we were considering becoming a Spinal Tap tribute band lol.
-
Well good luck, fingers crossed. I wont be there, but if there is a phone vote option....
-
I think there was a relatively inexpensive Ashton branded 300w valve amp that used a toroidal as the mains transformer, but maybe not for the output side.
-
Toroids in valve amps? This will just go round and round in circles...
-
That's great to hear. Open mic nights can be a lot of fun, and a great way to meet other musicians and play with them.
My band hosted a few and they could either be empty or oversubscribed, or in between. Although we did once have an MP turn up and sing a few songs with us.
And Johnny B Goode is a fun song.
Cheers
Geoff -
What about one of the Roland XL bass cubes?
-
[quote name='icastle' timestamp='1448582802' post='2916709']
Yet another possibility is a faulty speaker cable - Hartke heads have short circuit protection built in which will cut the output if it trips...
[/quote]
Have you tried the head with different speaker cables and cabs? Does the problem happen with just one particular cab/cable? Could be an issue in the cab causing the short circuit protection to trip. Maybe. -
Hi Steve is this the one I sold you? To prospective purchasers, Steve is a top chap to deal with.
Geoff -
[quote name='Bass Pedal Geek' timestamp='1442515483' post='2867544']
I got a review unit from DG a week ago or so. If you're want to hear how it sounds, I have uploadet the full review along with a bundh of audio clips here:
http://bass-pedals.com/darkglass-super-symmetry-review/index.html
[/quote]
Great review and a great site, which I have now bookmarked -
[quote name='richrips' timestamp='1447711456' post='2909770']
Cheers Danny,
i've gone ahead and ordered a Veyron [color=#282828][font=helvetica, arial, sans-serif]BV1001T for £352 delivered with a three year warranty and 60 days free returns if it's not my cup of tea, back it goes![/font][/color]
[color=#282828][font=helvetica, arial, sans-serif]Fingers crossed for a good amp![/font][/color]
[color=#282828][font=helvetica, arial, sans-serif]Rich[/font][/color]
[/quote]
Looking forward to a comprehensive summary of your thoughts, once you have had a chance to give it a workout. -
[quote name='spike' timestamp='1447792258' post='2910494']
Got mine from B&Q
[/quote]
Ditto. Still in use and has some knocks but going strong. -
Green all the way here.
-
[quote name='MoonBassAlpha' timestamp='1447330564' post='2906730']
About 2 quid will buy you a European to uk mains adaptor. I'd get one of those until they can sort you the proper one out.
[/quote]
This. -
It would be very bad korma to sell these...
-
Crikey, that deal is Scorchio!
-
[quote name='Bill Fitzmaurice' timestamp='1447106632' post='2905013']
A watt is a watt. If you want to do the same with 100w SS as you can with 100w valve use a compressor.
[/quote]
And that's exactly what I do with my puny Trace Elliot 200watt head, into kappalite drivers. -
Something old and green.
-
[quote name='Bill Fitzmaurice' timestamp='1446293513' post='2898387']
A 200HP BMW will go considerably faster than an 800HP tank.
[/quote]
Indeed, which is why lighter cabs are louder than heavier ones. Oh... -
I liked it, including JTs sound.
However, purple basses are far better for metal.
Trace Elliot GP7 SM 130......... £90....SOLD
in Amps and Cabs For Sale
Posted
I like how the head has been mounted into that case, is it a custom jobbie?
Great amps these, don't let the watt rating put you off.