-
Posts
1,645 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Shop
Articles
Posts posted by Jabba_the_gut
-
-
Only 7 weeks? Damn, I need to get some things finished to bring with me!!
- 1
-
I've had a lot going on recently outside of the bass world but finally got a few hours on this today. This was divided into two hours assembling this for the first time and an hour playing it!! Got a little bit of fettling (the bridge needs raising slightly on the treble side) but apart from that it sounded rather pleasing!!
- 12
-
Wow. Just looking at the pictures around the neck ferrules……it really has been attacked!!
-
A little detail finished - an aluminium thumb nail cover opener thing.
This is what will be the back of the second bass.
It needs to be flattened before I do anything with it as it has cupped slightly since I bought it a year or two back. Should look alright though!!
In the meantime, other bits of wood have been turning up so they can stand for a good while before I work on them. Nice slab of ash which will become a Telecaster shape (might be a bass, might be a guitar - no, no, no you say...)
- 7
-
The only good thing was I spotted it before I glued the fretboard in which would have made it far worse!!
-
Measure twice, measure twice again then cut. Then kick yourself……
Then spend some time removing LEDs and fit correctly!!!
- 4
-
4 hours ago, Smanth said:
Oh dear, ever had that D'oh feeling!?
Yep, I have one bass I made with a reverse headstock. Deliberate of course……
- 1
-
Just a quick update on this build.
- 6
- 3
-
10 minutes ago, Jimothey said:
I still don’t think just using a straight cutter just on the shank will give you a nice accurate clean cut as the cutter could still wandertop bearing cutters do exactly the same thing as straight flute they both bottom clear the only difference is one has a bearing
you use a bottom bearing when you have the workpiece upside down or use a router table so the bearing still runs on the template 👍🏻
I'd also be careful using a non-bearing cutter. If your template is plastic you might find it melting with the friction and the bit wandering. I've had this happen once when I was using a bearing cutter!! Must have had the speed all wrong.......
- 1
-
So this is my Katsu palm router as it comes - this shows the rack and pinion type depth adjustment.
This is the plunger base for it. Yep, makes it more expensive but it still lighter and easier to use than a 'normal' 1/4" router
And these are a selection of bearing cutters I use. The large one is a 1/2" one for trimming sides (scares me...), the middle one is a standard 12mm template cutter and the small one is a 5mm diameter template cutter for really tight corners!!
- 3
-
And yes, a template bit with a top bearing is what you want.
- 1
-
The Katsu palm router has a sort of rack and pinion adjustment for depth (like quite a few of this design). Not too expensive and pretty decent. I’ve ended up using it more due to it being lightweight.
The plunger base was almost as expensive as the router but makes a great unit.
-
Oh, and you can get plunger bases for palm routers. I bought a Katsu one and it’s great.
-
You can adjust the depth on them - absolutely fine for pickup cavities. Don’t move the bit out of the router - that is a recipe for something to go wrong (in my experience!!)
- 1
-
2 minutes ago, Woodinblack said:
Love the red leds!
Not as bright as the white ones I used previously!!
-
Blows the dust off this post......
Various things have caused me to have paused building for a bit but hopefully I can continue and finish a few builds I started last year.
It looks like I've rounded the body since I rounded the body edges since my last post. I also got round to installing some LEDS in the fretboard - I've taken the feedback from previous builds and made them not so blinding!!
- 3
-
57 minutes ago, LukeFRC said:
I’ve not changed the strings on mine yet… but
Just love the design of LeFay bridges
- 1
-
This is what I was trying to explain earlier regarding using standard double ball end strings for a multiscale. Not sure how string tension would be affected or what scale lengths you could get from this but it was just a thought.
Both drawings have strings of the same length
As you will also see, drawings are not my forte!
- 2
-
Personally, I like double ball end strings. I’ve always found the tuning to be very stable and not requiring any tools to change strings (including snips to cut the excess off normal string) is great. Speed to change strings is also really good especially on the Steinberger type bridges though this isn’t something done that often. The downside to me is choice. That is limited in terms of the different types, makes but also scale length.
There’s also lots of pros and cons regarding the bridges based on price, adjustment, how the strings are threaded through, if tools are needed, if they work for multi scale, ease of installation, ease of adjustment etc. I like the ABM style single tuners but they are expensive - pros and cons again!!
- 1
-
Something like this came up in the past and I wondered if you could do a multi scale headless with double ball end strings and a one piece bridge.
Essentially the strings are all the same length but the nut would be angled and individual saddles used to give the required string lengths (if this makes sense). I did a simple drawing on here for this a while back but can’t remember where!! No idea how this would be for string tension- I really should mock it up sometime to try.
I’ve had a few ideas in the past that I think would look neat but no-one makes the hardware that I would need and I’m not going down that custom route!!
- 2
-
Hi Andy. Didn’t have any issues with the bottom sections splitting in these. I drilled the hole with a 10mm Forstner bit - the inserts pushed nicely into this with out much force. I then secured them with CA glue. I think if I had drilled at 9.5mm (which is what I was initially thinking) they might have split.
I was looking back for the thread where you made some previously but couldn’t find it so this is what I came up with. I did try some experiments at first trying to cut out the knobs with a hole saw but that was, er, less than successful shall we say!!Cheers
-
It has been time consuming and I bet I have spent something around 15 hours in total. That includes all trial and error as well as making some decent knobs in the end. One of those thing that if I decide to do it again it would be a lot quicker. But it’s been enjoyable and I learnt something new.
Cheers
- 4
-
4 minutes ago, 3below said:
I find the developing jigs, tools, methods a considerable part of the joy of self builds
Completely agree. It’s just another part of the problem solving process that adds to the satisfaction. In this case I neither have the funds or space for a lathe just for this purpose so was really pleasing to find a way around it. Cheers
- 1
-
On 23/05/2022 at 12:42, PaulThePlug said:
Veneer... The Wood Veneer Hub...
https://www.thewoodveneerhub.co.uk/products/indian-rosewood-wood-veneer?_pos=1&_sid=8e4bd6437&_ss=r
I've an Indian Rosewood £1 'sample' 100mm x 120mm x 0.6mm coming to make a truss rod cover, they can supply bigger bits.
I’ve bought a few things from them and always been good.
Reading Festival
in General Discussion
Posted
My son went to this with group of friends and left early yesterday as the mood changed. It was his first festival and he said he wouldn't go there again. He went off to get some (overpriced) food and came back to find the tent slashed, camp chairs had been put on the fire, bottles being thrown etc. So they left.