deaky Posted November 23, 2009 Share Posted November 23, 2009 Hi all Can anyone tell me if I can connect a tecamp XS110 1x10 bass cab to a Tecamp combo 112. Its has a speaker out at the back of the combo so does that mean I can connect the two together and use as a complete unit. Iam also a bit confused regarding ohms!! The manual says you are free to use either speaker output if you want to connect more than one speaker cabinet. Just make sure that the minimum load of each power amp is no less than 4 ohms. Thus you can connect two 8 ohms speakers or one 4 ohms speaker. And finally Do I have the option of connecting a Phil Jones Suitcas extension cab to the combo. Would this work or would it sound rubbish... I hope that all makes sense. Many thanks in advance Quote Link to comment Share on other sites More sharing options...
warwickhunt Posted November 23, 2009 Share Posted November 23, 2009 Soz, was the other thread not clear enough? [url="http://basschat.co.uk/index.php?showtopic=67727&st=0&p=657367&#entry657367"]http://basschat.co.uk/index.php?showtopic=...mp;#entry657367[/url] "Can anyone tell me if I can connect a tecamp XS110 1x10 bass cab to a Tecamp combo 112. Its has a speaker out at the back of the combo so does that mean I can connect the two together and use as a complete unit." [b]Yes[/b] "I am also a bit confused regarding ohms!!" [b] So are loads of people[/b] "The manual says you are free to use either speaker output if you want to connect more than one speaker cabinet. Just make sure that the minimum load of each power amp is no less than 4 ohms. Thus you can connect two 8 ohms speakers or one 4 ohms speaker." [b]I'm fairly certain that you haven't quoted verbatim from the manual. Basically your Tecamp 112 combo will have one speakon speaker output on the rear, this can be connected to ANY 8 ohm cab NOT a 4 ohm cab (capitals used to save you an expensive experiment)! You can not connect a pair of 8 ohm cabs to the combo nor can you connect a 4 ohm cab.[/b] "Do I have the option of connecting a Phil Jones Suitcas extension cab to the combo." [b]Yes, you can connect a PJB extension cab to the Tecamp combo... so long as it is 8 ohms. [/b] "Would this work or would it sound rubbish..." [b]Yes it would work, as to whether it would sound any good is down to personal taste but it will increase the perceived volume and sound bigger/fuller.[/b] Quote Link to comment Share on other sites More sharing options...
deaky Posted November 23, 2009 Author Share Posted November 23, 2009 Hi Warwick Thanks for the info. Apologies for asking advice again - it just didnt seem to sink in the first time Thanks for clearing it up Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.