Walnut and Elm Jazz Bass

[Silky999]

Initial cutting and routing done on this beauty, just need to shape in the front and back.

 

 

[Silky999]

Front and back flattened and one side shaped. 
 

 

[Silky999]

Shaped, sanded, black grain filler and first coat of Liberon Finishing Oil. 
 

 

Edited December 26, 2025 by Silky999

[JPJ]

Oof 😍 that looks beautiful. The circular grain on the back is stunning.

[BassTool]

Absolutely superb, that looks mint! 👏🏼👏🏼👏🏼👏🏼👏🏼👌🏼

[Silky999]

Thanks Folks, it’s coming on a treat. The Liberon is now curing for 7 days before a couple of coats of shellac and starting the nitro clear coat. 

[HeadlessBassist]

@Silky999 You're becoming the single piece body artiste, my friend! That is seriously lovely... 

[potato bass]

On 24/12/2025 at 19:50, Silky999 said:

Shaped, sanded, black grain filler and first coat of Liberon Finishing Oil. 
 

 

How did it end ??

[Silky999]

Shellac is on and Nitro clearcoat starting today….

[JPJ]

9 hours ago, Silky999 said:

Shellac is on and Nitro clearcoat starting today….

I hope you have a warm and well ventilated workshop / spray booth?

[Silky999]

12 hours ago, JPJ said:

I hope you have a warm and well ventilated workshop / spray booth?

Yeah, I am on my second mdf spray booth in the workshop as the first one was a bit small. It has a 6” Vortex Pro extractor , led strip lights and a spraying jig. The extractor is ducted to outside and I wear a half face VOC respirator. I only spray 1k or nitro as 2k needs positive air fed respirator. The workshop(garage lol) has some fan and ceramic heaters which keeps its reasonable.