Jump to content
Why become a member? ×

Recommended Posts

Posted

Cost me about £350 back in the day and was the core of my board and IEM setup for a number of years.

 

Essentially it’s a 2 channel mixer with a DI, balanced and unbalanced out for the bass.

 

With a 2nd input for an IEM feed, this input is switchable mono/stereo. So basically allows you to take a really great FOH signal or utter trash. I use to take a passive feed out of the back of PA speakers.

 

There is then a thru for you to pass this feed on to other band members and I’ll include a 4 channel Behringer Headphone mixer (that currently I can’t find the 12v adaptor for) and you have an all in one IEM solution.

 

So you have a control for the bass volume and the feed volume. Allows as I saw above to just grab anything from FOH and you’ll always be able to hear yourself.

 

I do the same now with my Darkglass Anagram and in a pinch Element.

 

Open to offers and as above will chuck in the Behringer 4 ch headphone amp and 2 pairs of 🤷🏻‍♂️ KS10’s (without tips for hygiene purposes) to give you a full wired simple IEM rig for those wanting to try it all out.

 

Can also be used as a headphone amp with a Twelve South Airfly to add Bluetooth.

 

This was made about 15 years ago so to me is noisier than I would like and the pots can be a bit crackly, but I’ve never sprayed any switch spray in there.

 

Just part of my never ending clearout.

IMG_5105.jpeg

IMG_5106.jpeg

IMG_5107.jpeg

IMG_5108.jpeg

IMG_5109.jpeg

  • Like 3
  • 1 month later...
Posted

[sfx] gear is absolutely top notch and the support is fantastic, although it's extremely unlikely that you'll need any. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...