Fender Vintera II Bass VI Gold Anodized Pickguard

[betown]

Hi guys, where can I find a gold anodized pickguard for the Fender Vintera II Bass VI?

 

Person on the picture attached don't bother to reply to messages ...

 

Looks like the Squier version of the pickguard don't fit. Thank you!

 

[JJMotown]

Looks like the pickguard is spray painted gold, not gold anodized.

[neepheid]

Get your stock one cloned.  Either Brian Pillans (earlpilanz on eBay - https://www.ebay.co.uk/str/earlpilanz) or TinyTone - https://tinytone.co.uk/ will do this for you - you remove the pickguard from the bass, send the pickguard to them, they copy it in whatever material you want then send both of them back to you.

 

[MrFingers]

6 hours ago, JJMotown said:

Looks like the pickguard is spray painted gold, not gold anodized.

There is no bevel visible, and it appears very thin. I think this is a proper anodized guard.

[betown]

10 hours ago, neepheid said:

Get your stock one cloned.  Either Brian Pillans (earlpilanz on eBay - https://www.ebay.co.uk/str/earlpilanz) or TinyTone - https://tinytone.co.uk/ will do this for you - you remove the pickguard from the bass, send the pickguard to them, they copy it in whatever material you want then send both of them back to you.

 

Thank you! Tinytone will work 👌

[Musicman666]

On 18/07/2025 at 05:23, betown said:

Thank you! Tinytone will work 👌

this was done by tiny tone ...definitely send in the original to copy and for vinterra vi guards you need to ask for the screw holes to be added above and below the control plate because fender in their wisidom copied custom shop which has also got it wrong and missed them off from the original...  squire has actually got it correct in this regard. I still need to add the screws themselves. 

Edited 4 hours ago by Musicman666